| 1501 |
0307A: 2015(Revision No. 2)
|
IS 807: 2006(Second Revision)(Amendment 1)Reaffirmed 2010 DESIGN, ERECTION AND TESTING (STRUCTURAL PORTION) OF CRANES AND HOISTS - CODE OF PRACTICE |
| 1502 |
0305A : 1996(Reaffirmed 2015)
|
IS 2199 : 1989(First Revision) Reaffirmed 2010 RADIAL DRILLING MACHINES - TEST CHART |
| 1503 |
0301 A : 1996(Reaffirmed 2015)
|
IS 3694 : 1991(Second Revision)Reaffirmed 2013 TEST CHART FOR WOOD WORKING TURNING LATHES |
| 1504 |
0021A : 1996(Revision No. 1)(Reaffirmed 2015)
|
IS 1878 (Part I) : 1993(Second Revision)Reaffirmed 2008 TEST CHART FOR GENERAL PURPOSE PARALLEL LATHES : PART I LATHES WITH SWING OVER BED UPTO 800MM |
| 1505 |
3895 - 005 A : 1996(Reaffirmed 2015)
|
IS 1791 : 1985 (Second Revision)Reaffirmed 2009 GENERAL REQUIREMENTS FOR BATCH TYPE CONCRETE MIXER |
| 1506 |
0022A: 1996(Revision No. 1)(Reaffirmed 2015)
|
IS 1878: Part 2: 1992 (Second Revision) Reaffirmed 2008 TEST CHART FOR GENERAL PURPOSE PARALLEL LATHES:PART 2 LATHES WITH SWING OVER BED UP TO 800 MM AND UP TO 1600 MM |
| 1507 |
3439-002A : 1983 Amended 1991 Reaffirmed 2015
|
IS 1278 : 1972 (Second Revision) Reaffirmed 2013 Amendment 2 SPECIFICATION FOR FILLER RODS AND WIRES FOR GAS WELDING |
| 1508 |
8305 - 022 A : 1986 Reaffirmed 2015
|
IS 5088 : 1982 (First Revision) Reaffirmed 2007 AMD 2 SPECIFICATION FOR COTTON TEXTILES FOR AMMUNITION |
| 1509 |
8010 - 004 A : 1995 (Revision No. 1) Reaffirmed 2015
|
IS 80 : 1991 (Second Revision) Reaffirmed 2012 TUNG OIL FOR PAINTS - SPECIFICATION |
| 1510 |
0119 A : 1994 Reaffirmed 2015
|
IS 7018 (Part 1) : 1983 (First Revision) Reaffirmed 2008 TECHNICAL SUPPLY CONDITIONS FOR GAUGES : PART 1 GENERAL IS 7018 (Part 2) : 1983 (First Revision) Reaffirmed 2008 TECHNICAL SUPPLY CONDITIONS FOR GAUGES : PART 2 ASSEMBLY AND IDENTIFICATION OF PLAIN PLUG GAUGES (SIZE RANGE FROM 1 MM UP TO AND INCLUDING 250 MM) IS 7018 (Part 3) : 1983 (First Revision) Reaffirmed 2008 AMD 1 TECHNICAL SUPPLY CONDITIONS FOR GAUGES : PART 3 ASSEMBLY AND IDENTIFICATION OF SCREW PLUG GAUGES FOR ISO METRIC SCREW THREADS (SIZE RANGE FROM M1 UP TO AND INCLUDING M200) |
| 1511 |
0113 A : 2000 (Revision No. 1) Reaffirmed 2015
|
IS 2362 : 1993 (Second Revision) Reaffirmed 2010 Methods for Determination of Viscosity (or Fluidity) of DETERMINATION OF WATER BY KARL FISCHER METHOD - TEST METHOD |
| 1512 |
0111 A : 1990 Reaffirmed 2015
|
IS 1060 (Part 2) : 1960 Reaffirmed 2009 Methods for Determination of Viscosity (or Fluidity) of METHODS OF SAMPLING AND TEST FOR PAPER AND ALLIED PRODUCTS : PART 2 |
| 1513 |
0110 A : 2015 (Revision No. 1)
|
IS 1060 (Part 1) : 1966 (Revised) Reaffirmed 2009 AMD 5 Methods for Determination of Viscosity (or Fluidity) of METHODS FOR SAMPLING AND TEST FOR PAPER AND ALLIED PRODUCTS : PART 1 |
| 1514 |
0108 A : 1990 Reaffirmed 2015
|
IS 244 : 1984 (Second Revision) Reaffirmed 2010 METHODS FOR DETERMINATION OF VISCOSITY (OR FLUIDITY) OF SOLUTIONS OF COTTON AND REGENERATED CELLULOSIC MAN - MADE FIBRES IN CUPRAMMONIUM HYDROXIDE |
| 1515 |
0102 A : 1996 (Revision No. 1) Reaffirmed 2015
|
IS 4807 : 1968 Reaffirmed 2008 AMD 2 METHODS OF TESTING VISCOSE RAYON STAPLE FIBRES |
| 1516 |
0101 A : 1990 Reaffirmed 2015
|
IS 548 (Part 1) : 1964 (Revised) Reaffirmed 2011 AMD 5 METHODS OF SAMPLING AND TEST FOR OILS AND FATS - PART 1 : METHODS OF SAMPLING, PHYSICAL AND CHEMICAL TESTS |
| 1517 |
0076 A : 2015 (Revision No. 1)
|
IS 2500 (Part 1) : 2000 (Third Revision) Reaffirmed 2011 AMD 1 SAMPLING PROCEDURE FOR INSPECTION BY ATTRIBUTES - PART 1 : SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT - BY - LOT INSPECTION |
| 1518 |
Misc. 710A:2015 Revision No. 1
|
IS 1956 (Part 5):1976 (Frist Revision) Reaffirmed 2013 Amendment 3 GLOSSARY OF TERMS RELATING TO IRON AND STEEL -PART 5 : BRIGHT STEEL BAR AND STEEL WIRE |
| 1519 |
Misc. 708A:1997 Reaffirmed 2015
|
IS 1956 (Part 3):1975 Reaffirmed 2013 Amendment 3 GLOSSARY OF TERMS RELATING TO IRON AND STEEL PART III: HOT- ROLLED STEEL PRODUCT (EXCLUDING SHEET AND STRIP |
| 1520 |
Misc. 707A:1997 Reaffirmed 2015
|
IS 1956 (Part 1):1976 (First Revision) Reaffirmed 2012 GLOSSARY OF TERMS RELATING TO IRON AND STEEL - PART I : GENERAL METALLURGY, HEAT TREATMENT AND TESTING |
| 1521 |
Misc. 706A:1997 Reaffirmed 2015
|
IS 1716:1985 (Second Revision) Reaffirmed 2011 METHOD FOR REVERSE BEND TEST FOR METALLIC WIRE |
| 1522 |
Misc. 0780A:2003 Reaffirmed 2015
|
IS 7016 (Part 12):1987 Reaffirmed 2012 METHODS OF TEST FOR COATED AND TREATED FABRICS: PART 12 - DETERMINATION OF TACK-TEAR RESISTANCE |
| 1523 |
Misc. 0779A:2003 Reaffirmed 2015
|
IS 7016 (Part 11):1987 Reaffirmed 2012 METHODS OF TEST FOR COATED AND TREATED FABRICS: PART 11 - DETERMINATION OF FLEXIBILITY- FLAT LOOP METHOD |
| 1524 |
Misc. 0778A:2003 Reaffirmed 2015
|
IS 7016 (Part 10):1997 (First Revision) Reaffirmed 2013 METHODS OF TEST FOR COATED AND TREATED FABRICS- PART 10: RUBBER OR PLASTICS-COATED FABRICS- LOW-TEMPERATURE BEND TEST |
| 1525 |
Misc. 0776A:2003 Reaffirmed 2015
|
IS 7016 (Part 8):1975 Reaffirmed 2012 METHODS OF TEST FOR COATED AND TREATED FABRICS: PART 8 - ACCELERATED AGEING |
| 1526 |
Misc. 0775A:2015 Revision No. 1
|
IS 7016 (Part 7):2009 (Second Revision) METHODS OF TEST FOR COATED AND TREATED FABRICS: PART 7 - DETERMINATION OF RESISTANCE TO PENETRATION BY WATER |
| 1527 |
Misc. 0774A:2003 Reaffirmed 2015
|
IS 7016 (Part 6):1984 (First Revision) Reaffirmed 2013 Amendment 1 METHODS OF TEST FOR COATED AND TREATED FABRICS - PART 6: DETERMINATION OF BURSTING STRENGTH |
| 1528 |
Misc. 0770A:2003 Reaffirmed 2015
|
IS 7016 (Part II):1981 (First Revision) Reaffirmed 2013 METHODS OF TEST FOR COATED AND TREATED FABRICS: PART II - DETERMINATION OF BREAKING STRENGTH AND EXTENSION AT BREAK |
| 1529 |
Misc. 099A:1997 Reaffirmed 2015
|
IS 228 (Part 14) : 1988 Reaffirmed 2009 METHOD OF CHEMICAL ANALYSIS OF STEEL: PART 14 - DETERMINATION OF CARBON BY THERMAL CONDUCTIVITY METHOD (FOR CARBON 0.005 TO 2.000 PERCENT) |
| 1530 |
Misc. 098A:1997 Reaffirmed 2015
|
IS 228 (Part 13) : 1982 Reaffirmed 2009 METHODS OF CHEMICAL ANALYSIS OF STEELS- PART XIII: DETERMINATION OF ARSENIC |
| 1531 |
Misc. 096A:1997 Reaffirmed 2015
|
IS 228(Part 11) : 1990 (Third Revision) Reaffirmed 2009 METHODS OF CHEMICAL ANALYSIS OF STEELS : PART 11- DETERMINATION OF TOTAL SILICON BY REDUCED MOLYBDOSILICATE SPECTRO PHOTOMETRIC METHOD IN CARBON STEELS AND LOW ALLOY STEELS (FOR SILICON 0.01 TO 0.05 PERCENT) |
| 1532 |
Misc. 094A:1997 Reaffirmed 2015
|
IS 228(Part 9) : 1989 (Third Revision) Reaffirmed 2009 METHODS OF CHEMICAL ANALYSIS OF STEELS: PART 9-DETERMINATION OF SULPHUR STEELS BY EVOLUTION METHOD (FOR SULPHUR 0.01 TO 0.25 PERCENT) |
| 1533 |
3439-001A : 1983 Revision No. 2 Reaffirmed 2015
|
IS 959:1994 (Third Revision) Reaffirmed 2014 SPECIFICATION FOR ELECTRIC SOLDERING IRONS |
| 1534 |
3439-001A:1983 Revision No. 2 Reaffirmed 2015
|
IS 959:1994 (Third Revision) Reaffirmed 2014 SPECIFICATION FOR ELECTRIC SOLDERING IRON |
| 1535 |
0118 A : 2015 (Revision No. 1)
|
IS 196 : 1966 (Revised) Reaffirmed 2011 AMD 1 ATMOSPHERIC CONDITIONS FOR TESTING |
| 1536 |
0107 A : 1990 Reaffirmed 2015
|
IS 6931 : 1972 Reaffirmed 2008 METHODS OF TEST FOR PRINTING INKS |
| 1537 |
0104 A : 1990 Reaffirmed 2015
|
IS 5762 : 1970 Reaffirmed 2010 AMD 2 METHODS OF DETERMINATION OF MELTING POINT AND MELTING RANGE |
| 1538 |
3439-023A : 2010 Reaffirmed 2015
|
IS 2641:1989 (First Revision) Reaffirmed 2010 WELDING ACCESSORIES |
| 1539 |
3432-004A : 1992 Reaffirmed 2015
|
IS 4804 (Part IV) : 1973 Reaffirmed 2010 SPECIFICATION FOR RESISTANCE WELDING EQUIPMENT : PART IV SINGLE-PHASE STATIONARY, PRESS TYPE ROLL-SPOT AND SEAM WELDING MACHINES |
| 1540 |
3432-003A : 1992 Reaffirmed 2015
|
IS 4804 (Part 3) : 1969 Reaffirmed 2010 (Amendment 1) |
| 1541 |
3432-002A : 1992 Reaffirmed 2015
|
IS 4804 (Part II) : 1968 Reaffirmed 2010 (Amendment 1) SPECIFICATION FOR RESISTANCE WELDING EQUIPMENT : PART II SINGLE PHASE ROCKER-ARM SPOT WELDING MACHINES |
| 1542 |
3432-001A : 1992 Reaffirmed 2015
|
IS 4804 (Part I) : 1968 Reaffirmed 2010 SPECIFICATION FOR RESISTANCE WELDING EQUIPMENT : PART I SINGLE-PHASE TRANSFORMERS |
| 1543 |
3431-003A : 1996 Reaffirmed 2015
|
IS 6008 : 1989 (First Revision) Reaffirmed 2009 ARC WELDING POWER SOURCE, SINGLE OPERATOR RECTIFIER TYPE, a.c. AND d.c.-SPECIFICATION |
| 1544 |
Misc 243 A : 2010 Reaffirmed 2015
|
IS 11547 (Part 2) : 1985 Reaffirmed 2011 ELECTRONIC WEIGHING IN-MOTION SYSTEMS : PART - 2 REQUIREMENTS |
| 1545 |
Misc 240 A : 2010 Reaffirmed 2015
|
IS 11424 : 1985 Reaffirmed 2011 PORTABLE PROSPECTING RADIATION METERS WITH GAMMA-RAY SCINTILLATION DETECTORS (LINEAR SCALE INSTRUMENTS) |
| 1546 |
Misc 239 A : 2010 Reaffirmed 2015
|
IS 11423 : 1985 Reaffirmed 2011 PORTABLE PROSPECTING RADIATION METERS WITH GEIGER-MULLER COUNTER TUBE (LINEAR SCALE INSTRUMENTS) |
| 1547 |
Misc 242 A : 2010 Reaffirmed 2015
|
IS 11547 (Part 1) : 1985 Reaffirmed 2011 ELECTRONIC WEIGHING IN-MOTION SYSTEMS - PART : 1 TERMINOLOGY AND DESIGN RULES |
| 1548 |
Misc 241 A : 2010 Reaffirmed 2015
|
IS 11425 : 1985 Reaffirmed 2011 TEST PROCEDURES FOR SEMICONDUCTOR CHARGED PARTICLE DETECTORS |
| 1549 |
Misc 238 A : 2010 Reaffirmed 2015
|
IS 11148 : 1984 Reaffirmed 2011 EXPRESSION OF THE PROPERTIES OF SPECTRUM ANALYZERS |
| 1550 |
Misc 237 A : 2010 Reaffirmed 2015
|
IS 10767 (Part 2) : 2001 (First Revision) Reaffirmed 2011 PROGRAMMABLE FOR MEASURING INSTRUMENTS - INTERFACE SYSTEM (BYTE SERIAL, BIT PARALLEL) - PART : 2 CODES, FORMAT, PROTOCOLS AND COMMON COMMANDS |
