अनुमोदन अधिसूचना दस्तावेज़
| S.No | Document No. | Nomenclature | Standardisation Sub-Committee |
|---|---|---|---|
| 3551 | 8010-044A: 2011 (Revision No.1) | IS 2932 : 2003 TITLE OF IS ENAMEL, SYNTHETIC, EXTERIOR : (a) UNDERCOATING (b) FINISHING | SSSC-Current |
| 3552 | 8010-041A: 2011 (Revision No.1) | IS 63 : 2006 TITLE OF IS WHITING FOR PAINT AND PUTTY | SSSC-Superseded |
| 3553 | 6810-082A: 2011 (Revision No.1) | IS 5316 : 1998 TITLE OF IS AMMONIUM CARBONATE | SSSC-Current |
| 3554 | 6675-024A: 1983 Reaffirmed 2009 | IS 5694: 1970 REAFFIRMED 2009 AMDS 1 SPECIFICATION FOR ENGINEERS' DRAWING INSTRUMENTS, DOTTING PENS | ISSC-Superseded |
| 3555 | 6675-020A: 1994 (Revision No. 1) Reaffirmed 2010 | IS 3217: 1991 (FIRST REVISION) REAFFIRMED 2006 ENGINEERS' DRAWING INSTRUMENTS, PRICKERS - SPECIFICATION | ISSC-Superseded |
| 3556 | 6675-017A: 1994 (Revision No. 1) Reaffirmed 2010 | IS 3208: 1989 REAFFIRMED 2004 ENGINEERS DRAWING INSTRUMENTS - HALF SET OF COMPASSES - SPECIFICATION | ISSC-Superseded |
| 3557 | 6675-016A: 1994 (Revision No. 1) Reaffirmed 2010 | IS 3207: 1989 (FIRST REVISION) REAFFIRMED 2004 ENGINEERS' DRAWING INSTRUMENTS - ROTATING COMPASSES - SPECIFICATION | ISSC-Superseded |
| 3558 | 6675-065 A :2003(Rev No.1)(RA 2014) | ENGINEER's' DRAWING INSTRUMENTS, NEEDLE POINTS - SPECIFICATION | ISSC-Current |
| 3559 | 0162-2006 | IS 2303: PART 1: SEC 1: 1994 (FIRST REVISION) REAFFIRMED 2005 (AMENDMENT -1) GRADING GLASS FOR ALKALINITY - PART 1 : HYDROLYTIC RESISTANCE - SECTION 1 : HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 980C - METHOD OF TEST AND CLASSIFICATION | ISSC-Current |
| 3560 | 6750-021A-2006 | IS 14621: 1988 REAFFIRMED 2003 PHOTOGRAPHY - ELECTRONIC FLASH EQUIPMENT - DETERMINATION OF LIGHT OUTPUT AND PERFORMANCE | ISSC-Current |
| 3561 | 6730-003A-1997 | IS 13011: (Part-3): 1990 REAFFIRMED 2006 PHOTOGRAPHY - OVERHEAD PROJECTORS - PART 3 : FILM ROLLS, CORES AND WINDERS - DIMENSIONS | ISSC-Current |
| 3562 | 6730-002A-1997 | IS 13011: (Part-2): 1990 REAFFIRMED 2006 PHOTOGRAPHY - OVERHEAD PROJECTORS - PART 2 : TRANSPARENCIES AND TRANSPARENCY FRAMES - DIMENSIONS | ISSC-Current |
| 3563 | 6730-001A-1997 | IS 13011: (Part-1): 1990 REAFFIRMED 2006 PHOTOGRAPHY - OVERHEAD PROJECTORS - PART 1: PROJECTION STAGES - DIMENSIONS | ISSC-Current |
| 3564 | 6650-031A-1997 | IS 13117: 1991 REAFFIRMED 2006 MICROSCOPES' CONNECTING DIMENSIONS OF TUBE SLIDES AND TUBE SLOTS | ISSC-Current |
| 3565 | 6675-006A-1983 | IS 1562: 1962 REAFFIRMED 2006 (AMENDMENT -1) METRIC DIAGONAL SCALES (CARTOGRAPHER, SURVEYORS AND ENGINEERS) | ISSC-Current |
| 3566 | 6675-005A-1983 | IS 1492: 1970 (FIRST REVISION) REAFFIRMED 2009 (AMENDMENT -2) METRIC SURVEYING CHAINS | ISSC-Current |
| 3567 | Misc 1112A:2005 Reaffirmed 2011 | IS 4027 (Pt -9): 1991 METHODS OF CHEMICAL ANALYSIS OF BRONZES PART 9 DETERMINATION OF ALUMINIUM BY AAS METHOD (FIRST REVISION) REAFFIRMED 2007 | MSSC-Current |
| 3568 | Misc 1111A:2005 Reaffirmed 2011 | IS 4027 (Pt -8): 1990 METHODS OF CHEMICAL ANALYSIS OF BRONZES PART 8 DETERMINATION OF IRON (FIRST REVISION) REAFFIRMED 2007 | MSSC-Current |
| 3569 | Misc 1110A:2005 Reaffirmed 2011 | IS 4027 (Pt -7): 1990 METHODS OF CHEMICAL ANALYSIS OF BRONZES PART 7 DETERMINATION OF ANTIMONY BY RHODAMINE B SPECTROPHOTOMETRIC METHOD (FIRST REVISION) REAFFIRMED 2007 | MSSC-Current |
| 3570 | Misc 1109A:2005 Reaffirmed 2011 | IS 2600 (Pt - 4): 1988 METHODS OF CHEMICAL ANALYSIS OF ZINC AND ZINC BASE ALLOYS FOR DIE CASTINGS PART 4 DETERMINATION OF CHROMIUM BY SPECTROPHOTOMETRIC METHOD (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3571 | Misc 1108A:2005 Reaffirmed 2011 | IS 2600 (Pt - 3): 1988 METHODS OF CHEMICAL ANALYSIS OF ZINC AND ZINC BASE ALLOYS FOR DIE CASTINGS PART 3 DETERMINATION OF INDIUM BY ATOMIC ABSORPTION SPECTROMETRY METHOD (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3572 | Misc 1107A:2005 Reaffirmed 2011 | IS 2600 (Pt - 2): 1988 METHODS OF CHEMICAL ANALYSIS OF ZINC AND ZINC BASE ALLOYS FOR DIE CASTINGS PT - 2 DETERMINATION OF COPPER, IRON, LEAD AND CADMIUM BY ATOMIC ABSORPTION SPECTROPHOTOMETRIC METHOD (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3573 | Misc 1106A:2005 Reaffirmed 2011 | IS 2600 (Pt - 1): 1988 METHODS OF CHEMICAL ANALYSIS OF ZINC AND ZINC BASE ALLOYS FOR DIE CASTINGS PART 1 DETERMINATION OF COPPER, IRON, NICKEL, TIN AND THALLIUM BY SPECTROPHOTOMETRIC METHOD (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3574 | Misc 1105A:2005 Reaffirmed 2011 | IS 999: 1959 METHODS OF CHEMICAL ANALYSIS OF BRAZING SOLDER REAFFIRMED 2003 | MSSC-Current |
| 3575 | Misc 1104A:2005 Reaffirmed 2011 | IS 998 (Pt-3): 1983 METHODS OF CHEMICAL ANALYSIS OF SOLDERS (SOFT AND ROSIN CORED) PART - 3 DETERMINATION OF CADMIUM, ZINC, ALUMINIUM, BISMUTH AND NICKEL (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3576 | Misc 1103A:2005 Reaffirmed 2011 | IS 998 (Pt-2): 1983 METHODS OF CHEMICAL ANALYSIS OF SOLDERS (SOFT AND ROSIN CORED) PART -2 DETERMINATION OF IRON, COPPER AND ARSENIC (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3577 | Misc 1102A:2005 Reaffirmed 2011 | IS 998 (Pt-1): 1983 METHODS OF CHEMICAL ANALYSIS OF SOLDERS (SOFT AND ROSIN CORED) PART -1 DETERMINATION OF TIN AND ANTIMONY (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3578 | Misc 1101A:2005 Reaffirmed 2011 | IS 964:11956 METHODS FOR CHEMICAL ANALYSIS OF SILVER SOLDER REAFFIRMED 2003 | MSSC-Current |
| 3579 | Misc 0736A:2005 Reaffirmed 2011 | IS 1956 (Pt -6): 1976 GLOSSARY OF TERMS RELATING TO IRON AND STEEL: PART 6 FORGING (INCLUDING DROP FORGING) (FIRST REVISION) AMDS 2 REAFFIRMED 2006 | MSSC-Current |
| 3580 | Misc 0735A:2005 Reaffirmed 2011 | IS 1956 (Pt -2): 1976 GLOSSARY OF TERMS RELATING TO IRON AND STEEL - PART II: STEEL MAKING (FIRST REVISION) REAFFIRMED 2003 | MSSC-Current |
| 3581 | 9640-020A:2005 Reaffirmed 2011 | IS 13502:1992 PIG IRON REAFFIRMED 2005 | MSSC-Current |
| 3582 | 9640-010A:2005 Reaffirmed 2011 | IS 3445: 1992 FORGED STEEL ROLLS (FIRST REVISION) REAFFIRMED 2004 | MSSC-Current |
| 3583 | 9535-012 A : 2005 Revision No. 1 Reaffirmed 2013 | IS 2283: 2000 NICKEL - SILVER SHEET, STRIP SPECIFICATON (SECOND REVISION) REAFFIRMED 2011 | MSSC-Current |
| 3584 | 4710-015A:2005 Reaffirmed 2011 | IS 7285: 1988 SPECIFICATION FOR SEAMLESS STEEL CYLINDERS FOR PERMANENT AND HIGH PRESSURE LIQUEFIABLE GASES (SECOND REVISION) REAFFIRMED 2002 AMDS 5 | MSSC-Current |
| 3585 | MISC - 0327A: 1998 Reaffirmed 2011 | IS 5903: 1970 Reaffirmed 2006 RECOMMENDATIONS FOR SAFETY DEVICES FOR GAS CYLINDERS | EESSC-Current |
| 3586 | MISC - 0326A: 1998 Reaffirmed 2011 | IS 5845: 1993 (second revision) Reaffirmed 2007 CODE OF PRACTICE FOR INSPECTION OF LOW PRESSURE WELDED STEEL GAS CYLINDERS OTHER THAN LPG CYLINDERS IN USE | EESSC-Current |
| 3587 | MISC - 0323A: 1998 Reaffirmed 2011 | IS 6498: 1971 Reaffirmed 2006 GLOSSARY OF TERMS USED IN CONNECTION WITH PULLEY BLOCKS | EESSC-Current |
| 3588 | 4210-004A: 2004 (Revision No. 1) Reaffirmed 2011 | IS 3224: 2002 (third revision) Reaffirmed 2007 Amendments 2 VALVE FITTING FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - SPECIFICATION | EESSC-Superseded |
| 3589 | 4030-009A: 2004 Reaffirmed 2011 | IS 6132: 2003 (first revision) reaffirmed 2009 FORGED SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES | EESSC-Current |
| 3590 | MISC - 0324A: 1998 Reaffirmed 2011 | IS 6549: 1972 Reaffirmed 2006 GLOSSARY OF TERMS USED IN CONNECTION WITH LIFTING TACKLE | EESSC-Current |
| 3591 | MISC 0319A: 2011 (Revision No. 1) | IS 3459: 2004 (second revision) SMALL WIRE ROPES - SPECIFICATION | EESSC-Superseded |
| 3592 | 4030-004A: 1996 Reaffirmed 2011 | IS 2762: 1983 (first revision) reaffirmed 2006 SPECIFICATION FOR WIRE ROPES SLINGS AND SLING LEGS | EESSC-Superseded |
| 3593 | 4010-004A: 2011 (Revision No. 1) | IS 1856: 2005 (third revision) (Amendment 1) STEEL WIRE ROPES FOR HAULAGE PURPOSES - SPECIFICATION | EESSC-Current |
| 3594 | 3950-001A: 1996 Reaffirmed 2011 | IS 3938: 1983 (second revision) Reaffirmed 2008 SPECIFICATION FOR ELECTRIC WIRE ROPE HOISTS | EESSC-Superseded |
| 3595 | 3895-008A: 2004 Reaffirmed 2011 | IS 2094 (Part-2): 1999 Reaffirmed 2005 SPECIFICATION FOR HEATER FOR BITUMEN (TAR) AND EMULSION PART 2 : BITUMEN SPRAYER | EESSC-Superseded |
| 3596 | 3895-004A: 1996 Reaffirmed 2011 | IS 3251: 1965 Reaffirmed 2007 SPECIFICATION FOR HOT ASPHALT MIXING PLANTS | EESSC-Superseded |
| 3597 | 3810-001A: 2011 (Revision No. 1) | IS 3832: 2005 (third revision) (Amendment 1) HAND - OPERATED CHAIN PULLEY BLOCKS - SPECIFICATION | EESSC-Superseded |
| 3598 | MISC 1023A : 2011 | IS 11509: Part 6: 2006/ ISO 4548-5 : 1990 TITLE OF IS: METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES PART 6 COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY TEST | VSSC-Superseded |
| 3599 | 4720-009A : 2011 | IS 635: 1982 (Reaffirmed 2006 & Amd 1) TITLE OF IS :SPECIFICATION FOR OIL AND SOLVENT RESISTANT HOSE OF RUBBER | VSSC-Current |
| 3600 | 2530-042A : 2011 | IS 13196 : 1991 (Reaffirmed 2007) TITLE OF IS: AUTOMOTIVE VEHICLES - LIGHT ALLOYS WHEEL FOR MOTORCYCLES - SPECIFICATION | VSSC-Current |