2201 |
5360-02-2019 First Rev
|
Material For Spring Helical Compression DS Cat No. 5360-004 863 NSN 5360720133855 |
2202 |
5345-05-2019 Fifth Rev
|
Abrasive Sticks, Emery or Corundum (No. 00, 0, 1, 2 and 3) |
2203 |
0467-01-2019 Third Rev
|
The Manufacture Of Armament Components in Weldable Cr-Ni-Cu-Mo Precipitation Hardening Corrosion Resisting Steel |
2204 |
0461-01-2019 Fifth Rev
|
Passivations Of Brass Components Of Cartridge Cases Fuse, Primers Etc |
2205 |
1375-02-2012 (Second Revision) Withdrawal 2017
|
Exploder Dynamo |
2206 |
6230-05-2019 (Third Revision)
|
Light Head Band |
2207 |
6625-13-2019 (Fifth Revision)
|
Voltmeter, Electrostatic, 0kV-2.5kV & 0kV-5kV |
2208 |
4210 -24 : 2007
|
Truck, Fire Fighting, Dry Chemical Powder, 250 kg |
2209 |
7330-22 ; 2018
|
CONTAINER, 9 LITRES (DS CAT PART No. 7330-000 118) (NSN - NYA) |
2210 |
53001:1974
|
Detail Specification For Waveguides, Rigid, Rectangular |
2211 |
51306:1972
|
Detail Specification For High Current Rectifiers(5-200 Ampere Rating) |
2212 |
51206:1975
|
Detail Specification For Switches Pushbutton, Illuminated |
2213 |
50831: 1972
|
Detail Specification For Connectors Circular Audio |
2214 |
6625-41:1982
|
Specification For Cable Tester |
2215 |
9505-03 - 2017 (SECOND REVISION)
|
18% Chormium 10% Nickel Austenitic Stainless Steel MDN 321A WIRES(ANNEALED & COLD DRAWN) |
2216 |
6520-51-2004 (Revision No. 2)
|
Screw Driver, Small, All Metal With Revolving Head, Set of 4 Sizes |
2217 |
6520-21-2004 (Revision No. 3)
|
Flask, Empire Fig 3, Clamp for (DS Cat No. 6520-001 310) |
2218 |
6515-66-2006 (Revision No. 2)
|
Viscerotome Complete with Leather Sheath |
2219 |
8115-01: 2018 (Fourth Revision)
|
Boxes Rigid Collapsable Covered Type D |
2220 |
6220-04 2018 (Fourth Revision)
|
Head Light |
2221 |
2510-5-2018
|
Shock Absorber for Tatra Vehicle |
2222 |
2330-06 2019 (Fourth Revision)
|
Trailer , 2 Tonne, 4 Wheeled, Low Bed |
2223 |
2320-09 2018 (Second Revision)
|
2.5 Tonne 4X4 General Service Vehicles |
2224 |
2310-09-2011 Withdrawal
|
M and M 550 XD, 4WD Soft Top 8 Seater |
2225 |
8415 - 07 : 2013 (Revision No. 2)
|
APRONS, COOK (DS Cat Nos. 8415 - 000 001) |
2226 |
8405-08 2017
|
Great Coat short with Hood |
2227 |
7210-24-2018
|
BLANKET, BARRACK, NATURAL GREY AND BLANKET HOSPITAL |
2228 |
6510-01-2018 (Sixth Revision)
|
Gauze absorbent, Folded : 1 cm x 100 m and Gauze absorbent, Folded : 2.5 cm x 100 m |
2229 |
6515-100-2017
|
Leg Rest, Clamp for PVMS No. 030150 (OLD PVMS No. 03120) |
2230 |
6510-14-2018 (Sixth Revision)
|
Napkin Absorbent Dental Disposable 1' x 1' PKT of 20 PVMS No. 100166 (OLD PVMS NO. 10530) |
2231 |
6510-12-2018 (Sixth Revision)
|
Dressing , first Aid, Unmedicated Sterile Pack PVMS No. 120043 (OLD PVMS No. 12310A) (DS Cat No. 6510-000 165) |
2232 |
6510-10-2018 (Sixth Revision)
|
Pad, cotton wool, Dental, box of 100 and Pad, small in bag of 50 |
2233 |
6510-08-2018 (Sixth Revision)
|
Pad Abdominal Swab 40 cm x 25 cm with Tape 30 cm and Pad Abdominal Swab 25 cm x 25 cm with Tape 30 cm |
2234 |
6530-27-2018
|
Pins Safety, 2 Sizes 3.89 cm and 3.33 cm, set of 12 (6 of Each size) PVMS No. 120099 (OLD PVMS No. 12360) |
2235 |
6515-102-2017
|
Saw Amputating, Handle only PVMS No. 050251 (OLD PVMS No. 05694) |
2236 |
6515-101-2017
|
Retractor langen beck 4.5cm x 1.25cm PVMS No.050239 (OLD PVMS No. 05676) |
2237 |
6510-13-2018 (Sixth Revision)
|
Tape, Board, Piece of 16.5 metre |
2238 |
5935-03-2018 (Fourth Revision)
|
Jointing Sleeves Electrical (Twist Type) |
2239 |
9150-93 - 2017
|
Multipurpose Aircraft Grease- operating Range (-55°C to 177°C) (Type : XG-293) (DS CAT No. 9150-000 017) (NSN 91507202499) |
2240 |
1730-01-2001 (Withdrawn 2017)
|
Starting Trolling Ground Electric 24/30 volts d.c Sec. Ref. 304f/320. 170008578 |
2241 |
9515-025-2018
|
Material specification for ultra high strength steel plates for era containers |
2242 |
9515-024-2018
|
Schedule of specification to govern the supply of carbon steel (NON- Shrinking) |
2243 |
9515-023-2018
|
Material specification for gilding metal clad steel strip |
2244 |
9530-015-2018
|
Specification for ZINC-Aluminium Copper Bearing alloy Casting on extruded Bars |
2245 |
9515-12:2008 Revision No. 1
|
STEEL DISCS AND STRIPS FOR CARTRIDGE CASES |
2246 |
3431-06-2018
|
Wielding machine, ARC, Mounted on Trailer 1 TON 2 Wheeled, Electric wielding set diesel engine driven 250A and 30 V , d.c |
2247 |
3439 - 03 : 2015 (Revision No. 3)
|
SOLDERING GUN, 240 V ac, 50 / 60 Hz, 60, 80, 100, 125 & 150 W (DS CAT PART No. F 1 / 3439 - 003 173, 174, 175, 180 & 181) & SOLDERING GUN, 115 V ac, 50 / 60 Hz, 60, 80, 100, 125 & 150 W (DS CAT PART No. F 1 / 3439 - 003 182, 295, 176, 179 & 177) |
2248 |
0201-2017 (Second Revision)
|
Precautions Against electric shocks in design installation, use for servicing workshops, and training laboratory for electrical, electronics and weapons equipment |
2249 |
5925-02-2018 (Second Revision)
|
Circuit Breakers, Earth Leakege, a.c., Voltage Operated |
2250 |
5920-02-2017 (Second Revision)
|
Fuse board for voltage not exceeding 1000 V ac and 1200 V dc |