जेएसएस दस्तावेज़
| S.No | Document No. | Nomenclature | Standardisation Sub-Committee |
|---|---|---|---|
| 3451 | 51402:1991 Reaffirmed 2007 | MICROCIRCUITS, MONOLITHIC, SILICON DIGITAL, TTL NOR GATES (DS CLASS) | LSSC-Superseded |
| 3452 | 6810-145: 2006 | BASIC LEAD STEARATE | ASSC-Superseded |
| 3453 | 8305-18: 2006 (Revision No. 2) | WEBBING COTTON (DS Cat No. 8305-000 021) | ASSC-Superseded |
| 3454 | 6640-12 : 2007 (Revision No. 3) | BASIN, EVAPORATING, BOROSILICATE, ROUND BOTTOM WITH SPOT 78 mm dia - DS Cat No. 6640-000 047 WITH SPOT 90 mm dia - DS Cat No. 6640-000 048 WITHOUT SPOT 60 mm dia - DS Cat No. 6640-000 181 WITHOUT SPOT 90 mm dia - DS Cat No. 6640-000 182 | SSSC-Superseded |
| 3455 | 51417:1997 Reaffirmed 2007 | DETAIL SPECIFICATION FOR MICROCIRCUITS, MONOLITHIC, SILICON, DIGITAL, LSTTL, DATA SELECTORS/ MULTIPLEXERS (DS Class 5962) | LSSC-Superseded |
| 3456 | 6810-55: 2006 (Revision No. 3) | CALCIUM OXALATE (MONOHYDRATE) (DS Cat No. 6810-000 901) | ASSC-Superseded |
| 3457 | 5130-07: 2006 (Revision No. 3) | DRILL, ELECTRIC, PORTABLE, MEDIUM DUTY, 13 mm DIA, 220/240 V ac, SINGLE PHASE, 50 Hz (DS Cat No. 5130-001 910) | EESSC-Superseded |
| 3458 | 5306-08 : 2012 | BI - HEXAGONAL BOLTS (Multiple DCANs as mentioned at para - 6.2 ) | AeroSSC-Superseded |
| 3459 | 6675-34: 2007 (Revision No. 2) | PEN. RULING . DRAUGHTSMAN's LITHOGRAPHIC, LARGE (DS CAT NO. 6675-000 034) | ISSC-Superseded |
| 3460 | 52710: 1972 Reaffirmed 2012 (Hindi) | SPECIFICATION FOR TERMINALS, CAPTIVE SCREW CAP AND CAPTIVE SPRING LOADED | LSSC-Superseded |
| 3461 | 7210-14: 1984 Reaffirmed 1997 | SHEET, BED : HOSPITAL 182 X 91 cm (DS Cat No. 7210-000025) | SSSC-Superseded |
| 3462 | 8030-02: 2007 (Revision No. 3) | DUBBIN, PROTECTIVE (DS CAT NO. 8030-000 048) | SSSC-Superseded |
| 3463 | 8110-01: 2008 Amdt 1 | PLASTIC CONTAINERS (WITH OUT LID) FOR CARRIAGE OF FRESH ITEM (DS Cat No. 8110 - 000 839) | SSSC-Superseded |
| 3464 | 6640: 01: 2002 (Revision No. 1) | BURETTE | SSSC-Superseded |
| 3465 | 8010-38: 1998 (Revision No. 1) (Reaffirmed 2006) | LACQUEER, CLEAR (DS Cat No. 8010-000 268 and 000 269) | SSSC-Superseded |
| 3466 | 53000: 1974 Reaffirmed 2012 (Hindi) | GENERAL REQUIREMENTS FOR WAVE GUIDES, HOLLOW | LSSC-Superseded |
| 3467 | 6625-25: 1980 Reaffirmed 1998 | ANALYSER SET, ENGINE (Automobile Tester) | ESSC-Superseded |
| 3468 | 5133-01 : 2006 (Revision No. 2) | BITS, BRACES, CARPENTER'S, COBRA (DS Cat No. 5133-000 224 and 000 225) | EESSC-Superseded |
| 3469 | 8040-12: 1993 (Revision No. 1) (Supersedes JSS 8040-12: 1980) | ADHESIVE RUBBER SOSINE XN (APC NO. 6) & ADHESIVE RUBBER ROSIN XP (APC NO. 6a) (DS Cat No. 8040-000 007 | ASSC-Superseded |
| 3470 | 5855-14 : 2012 | CREW SERVED WEAPON SIGHT (MMG), PASSIVE, CASED, 101A DS CAT / PT NO. (Z7 / 5855 - 000503) | ISSC-Current |
| 3471 | 6650-06: 2007 (Revision No. 2) | GLASS MAGNIFYING, HAND, 100 mm (DS CAT No. 6650 000 003) | ISSC-Superseded |
| 3472 | 3415-07:2006 (Revision No. 2) | GRINDING MACHINE, UTILITY, WHEEL DIA 350 x 50 mm, ELECTRIC, 3 PHASE, 50 Hz., 415 V ac (DS Cat No. 3415 -000 032) | EESSC-Superseded |
| 3473 | 5130-06: 2006 (Revision No. 3) | DRILL, ELECTRIC, PORTABLE, HEAVY DUTY, 25 mm DIA, 220/240 V ac, SINGLE PHASE, 50 Hz (DS Cat No. 5130-001 911) | EESSC-Superseded |
| 3474 | 8030-01 : 1998 (Revision No. 2) (Reaffirmed 2007) | DUBBIN, ORDINARY (DS CAT NO. 8030-000 047) | SSSC-Superseded |
| 3475 | 2610-04: 2002 | TYRES PNEUMATIC FOR AUTOMOBILES | VSSC-Superseded |
| 3476 | 6840-04: 2005 (Revision No. 2) | MARITIUS YELLOW | SSSC-Superseded |
| 3477 | 8010-86:2012 | HIGH TEMPERATURE OXIDATION RESISTANT (Al-Si-Y) COATING ON TURBINE BLADES (DS CAT NO 8010007686) | AeroSSC-Superseded |
| 3478 | 9150-28: 2006 (Revision No. 3) | OIL, ENGINE PRESERVATIVE, SAE-30 (DS Cat No. 9150-000 073) | SSSC-Superseded |
| 3479 | 8010-82 :2012 | PAINT, RFU, FINISHING, MATT AIR DRYING BRUSHING/SPRAYING D.S. Cat No- (8010-000575 ,577 ,578 & 579 | SSSC-Current |
| 3480 | 7330-46: 2006 (Revision No. 1) | MINCING MACHINE, HAND, LARGE/SMALL (DS Cat No- 7330-000 238 & 239) | SSSC-Superseded |
| 3481 | 7320-04: 2005 (Revision No. 1) | MACHINE, BREAD CUTTING | SSSC-Superseded |
| 3482 | 7930-01:1998 (Revision No.1) | LIQUID CLEANER FOR AUTOMOBILES (DS Cat No. 7930 -000 001) | SSSC-Superseded |
| 3483 | 5120-57: 2006 | BURNISHERS OVAL SECTION (DS CAT No. 5120 - 001 047) | SSSC-Superseded |
| 3484 | 53400:1997 Reaffirmed 2007 | SPECIFICATION FOR DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIP LINE (DS CLASS 5985) | LSSC-Superseded |
| 3485 | 50502:1980 Reaffirmed 2007 | DETAIL SPECIFICTIION FOR RESISTORS, VARIABLE WIRE WOUND (LOW OPERATNG TEMPRATURE) (DS CLASS 5905) | LSSC-Superseded |
| 3486 | 4210-06 : 2006 (Revision No. 3) | EXTINGUISHER, FIRE, DRY POWDER, 10 kg CAPACITY (DS Cat No. 4210-000 043) | EESSC-Superseded |
| 3487 | 6640-03:2007 (Revision No. 2) | BOTTLES, ASPIRATIR, BOROSILICATE (DS Cat Nos. 6640-000 058 to 6640-000 059) | SSSC-Superseded |
| 3488 | 5860-01: 2012 | GAP MEASURING DEVICE GMD MK-II, CASED DS CAT/PT NO. (Z7/BEL/1800 001 201 74) | ISSC-Superseded |
| 3489 | 9150-37:2003 (Revision No. 1) | OIL MK-8P | SSSC-Superseded |
| 3490 | 6625-89:2010 (Revision No.1) (Supersedes 51810: 1993) (Hindi) | DETAIL SPECIFICATION FOR FREQUENCY METERS, REED TYPE | LSSC-Superseded |
| 3491 | 4931-01: 2007 (Revision No. 1) | COLLIMATOR BINOCULAR MK 4 (DS Cat No. 4931-000 001) | ISSC-Superseded |
| 3492 | 8430-12:2010 Amendment 1 | BOOTS ANKLE LEATHER DIRECT VULCANIZED SOLE IN SIZES 5 TO 12 WITH MEDIUM, LARGE AND EXTRA LARGE (DS Cat No. 8430 - 000 011 to 000 013, 015 to 017, 019 to 025, 027 to 033 & 035 to 037 and 039 to 041) | SSSC-Superseded |
| 3493 | 8010-19:1992 (Revision No.1) Reaffirmed 2006 | VARNISH, STAIN, BLACK (DS CAT NO. 8010-000 483) | SSSC-Superseded |
| 3494 | 6840-09: 2005 (Revision No. 3) | TASTE REMOVER TABLET (DS Cat No 6840-000-013) | SSSC-Superseded |
| 3495 | 7930-01:2006 (Revision No.2) | LIQUID CLEANER FOR AUTOMOBILES (DS Cat No. 7930 -000 001) | SSSC-Superseded |
| 3496 | 6125-01: 2004 (Revision No. 1) | MOTOR GENERATORS (ROTARY CONVERTORS) | ESSC-Superseded |
| 3497 | 5305-02: 2006 | SCREW WITH ROUND HEAD | AeroSSC-Superseded |
| 3498 | 7330-9: 2004 (Revision No. 2) | BOARD, FOOD SLICING: PASTRY, LARGE MK2 (DS Cat No. 7330-000 163) | SSSC-Superseded |
| 3499 | 8010-84:2012 | HIGH TEMPERATURE ANTI-FRICTION COATING ChBSP-3C ON AERO-ENGINE COMPONENTS (DS CAT NO 8010007685) | AeroSSC-Superseded |
| 3500 | 7105-09: 2005 (Revision No. 1) | LADDERS, STANDING, 3 METRES (DS Cat. No. 7105-000 059) | SSSC-Superseded |