अनुमोदन अधिसूचना

अनुमोदन अधिसूचना दस्तावेज़

S.No	Document No.	Nomenclature	Standardisation Sub-Committee
2401	1131 A:2014 (Revision No.1)	METHOD FOR DETERMINATION OF PLASTIC STRAIN RATIO 'R' FOR STEEL SHEETS	MSSC-Current
2402	6105-004A : 2010 (Revision No.2)	IS 996:2009 SINGLE PHASE A.C. INDUCTION MOTORS FOR GENERAL PURPOSE	ESSC-Superseded
2403	5930-006A:1988 Reaffirmed 2010	IS 3452 (Part 2) :1970 (Reaffirmed 2007) SPECIFICATION FOR TOGGLE SWITCHES - PART 2 : TOGGLE SWITCHES, TYPE I AND TYPE II	ESSC-Superseded
2404	6750-018A-2005	IS 10290: 1982 REAFFIRMED 2004 CODE OF PRACTICE FOR PHOTOGEOLOGICAL INTERPRETATION AND MAPPING OF RIVER VALLEY PROJECT SITE	ISSC-Current
2405	6650-030A-2005	IS 13108 (PART-1): 2002 (FIRST REVISION) REAFFIRMED 2007 OPTICS AND OPTICAL INSTRUMENTS - MICROSCOPES - PART-1: IMMERSION OIL FOR GENERAL USE IN LIGHT MICROSCOPY	ISSC-Current
2406	6645-006A-2005	IS 9783: 1981 REAFFIRMED 2007 AMDS -2 NOMENCLATURE OF PARTS FOR WRIST WATCHES	ISSC-Current
2407	6630-009A-1996	IS 12255: 1988 REAFFIRMED 2008 BAUME HYDROMETERS	ISSC-Current
2408	6605-003A-1996	IS 5146: 1969 REAFFIRMED 2006 SPECIFICATION FOR SOUNDING SEXTANT	ISSC-Current
2409	MISC 0814A:1999 (Reaffirmed 2012)	IS 14381: 1996 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES - ELECTRICAL CIRCUITS - RECOMMENDED GRAPHICAL SYMBOLS	VSSC-Current
2410	7210-049A : 2011 (Revision No.1) Amendment 2	IS 1431 : 1973 TITLE OF IS COTTON MOSQUITO NETTING, ROUND MESH	SSSC-Current
2411	MISC-1119A:2005 Reaffirmed 2012	IS 8812 (PART 1): 1978 METHODS FOR CHEMICAL ANALYSIS OF HARD SOLDERS FOR JOINTING ALUMINIUM AND ALUMINIUM ALLOYS, PART 1 DETERMINATION OF SILVER, COPPER, ZINC, ANTIMONY, ARSENIC, IRON AND BISMUTH REAFFIRMED 2008	MSSC-Current
2412	MISC-1115A:2005 Reaffirmed 2012	IS 4667 (PART 1): 1968 METHODS OF CHEMICAL ANALYSIS OF SILVER COPPER BRAZI NG ALLOYS PART 1 ANALYSIS FOR SILVER AND COPPER REAFFIRMED 2007	MSSC-Current
2413	6515-139A : May 1988 Reaffirmed 2010	IS - 6989: 1973 Reaffirmed 2003	MedSSC-Current
2414	Misc - 0359A: 2010	IS 5444: 1978 (FIRST REVISION) Reaffirmed 2007 (AMDS - 2) SPECIFICATION FOR PARALLEL HAND REAMERS WITH PARALLEL SHANKS	EESSC-Current
2415	5950-006A:1999 (Revision No.1) Reaffirmed 2010	IS 2705 (Part 4):1992 (Reaffirmed 2007) CURRENT TRANSFORMERS: PART 4 PROTECTIVE CURRENT TRANSFORMERS FOR SPECIAL PURPOSE APPLICATIONS	ESSC-Superseded
2416	5930-005A:1988 Reaffirmed 2010	IS 3452 (Part 1) :1966 (Reaffirmed 2007) SPECIFICATION FOR TOGGLE SWITCHES - PART I : GENERAL REQUIREMENTS AND TESTS	ESSC-Superseded
2417	4210-012A:2005 (Revision No.1) Reaffirmed 2010	IS 1646:1997 (Reaffirmed 2007) CODE OF PRACTICE FOR FIRE SAFETY OF BUILDINGS (GENERAL) : ELECTRICAL INSTALLATIONS	ESSC-Superseded
2418	3431-003A:1996 Reaffirmed 2010	IS 6008:1989 (Reaffirmed 2009) ARC WELDING POWER SOURCE, SINGLE OPERATOR RECTIFIER TYPE AC AND DC-SPECIFICATION	ESSC-Superseded
2419	5306 - 08A: 2010	IS 1363 (Part I): 2002 TITLE OF IS HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - (PART 1) : HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64)	SSSC-Current
2420	5130-008A: 2005 Reaffirmed 2012	IS 5364: 1969 Reaffirmed 2008 SPECIFICATION FOR TWIST DRILLS FOR TAPER PIN HOLES WITH TAPER 1:50	EESSC-Current
2421	5130-007A: 2005 Reaffirmed 2012	IS 5363: 1983 (First Revision) Reaffirmed 2008 SPECIFICATION FOR MICRO-DRILLS	EESSC-Current
2422	MISC 0815A:1999 (Reaffirmed 2007) (Withdrawn 2012)	IS 14382: 1996 (Reaffirmed 2006) TITLE OF IS: AUTOMOTIVE VEHICLES - SPEED LIMITERS - SPECIFICATION FOR INSTALLED REQUIREMENTS	VSSC-Current
2423	6810-014 A: 2012 (Revision No. 1)	IS 3504 : 2006 TITLE OF IS : THYMOL	SSSC-Superseded
2424	8315-001A: 2011 (Revision No.1)	IS 1895: 1982 TITLE OF IS TAPE NEWAR	SSSC-Superseded
2425	Misc - 0358A: 2010	IS 5366: 1978 (FIRST REVISION) Reaffirmed 2007 (AMDS - 2) SPECIFICATION FOR CORE DRILLS, MORSE TAPER SHANKS	EESSC-Current
2426	5935-002A:2010 (Revision No.2)	IS 1293:2005 PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO AND INCLUDING 16 AMPERES - SPECIFICATION	ESSC-Superseded
2427	0077A-1995	IS 1448 (PART-16): 1990 (THIRD REVISION) REAFFIRMED 2007 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS: PART- 16 DENSITY, RELATIVE DENSITY OR API GRAVITY OF CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS BY HYDROMETER METHOD	ISSC-Current
2428	Misc - 0361A: 2010	IS 7772: 1975 REAFFIRMED 2007 AMD -1 SPECIFICATION FOR SHELL CORE DRILLS	EESSC-Current
2429	5306 - 06A: 2010	IS 1366: 2002 TITLE OF IS SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE-A	SSSC-Current
2430	6625-006A : 1987 (Reaffirmed 2010)	SPECIFICATION FOR NEON TESTERS	ESSC-Superseded
2431	8440-005A : 1992 (Reaffirmed 2012)	IS 3329 : 1973 TITLE OF IS : SOCKS, COTTON	SSSC-Current
2432	MISC 0812A:1999 (Reaffirmed 2012)	IS 14346 (Part 1) : 1996 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES - PASSENGER CARS VERIFICATION OF DRIVERS DIRECT FIELD OF VIEW (PART 1) VEHICLE POSITIONING FOR STATIC MEASUREMENT	VSSC-Current
2433	2520-013A: 2007 (Reaffirmed 2012)	IS 12535 (Part 3) : 1991 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES- TRANSMISSION SYSTEMS- GLOSSARY- PART 3 DRIVE AXLES DEFINITION	VSSC-Current
2434	MISC 0837A : 2000 (Reaffirmed 2007) (Withdrawn 2012)	IS 14272(Part I) : 1995/ISO 3833:1977 (Reaffirmed 2005) TITLE OF IS: AUTOMOTIVE VEHICLES - TYPES - TERMINOLOGY PART 1 THREE AND FOUR WHEELERS	VSSC-Current
2435	MISC 0827A: 2000 (Reaffirmed 2012)	IS 8098 (Part 2): 1981 (Reaffirmed 2007) TITLE OF IS : CODE OF PRACTICE FOR FINISHING OF AUTOMOBILE BODIES PART-2 REFINISHING OF PASSENGER CARS	VSSC-Current
2436	MISC 0813A:1999 (Reaffirmed 2012)	IS 14346 (Part 2) : 1996 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES - PASSENGER CARS VERIFICATION OF DRIVERS DIRECT FIELD OF VIEW (PART 2) METHOD OF TEST	VSSC-Current
2437	MISC - 0901A: 2000 (Reaffirmed 2010)	IS 1572:1986 TITLE OF IS : SPECIFICATION FOR ELECTROPLATED COATINGS OF CADMIUM ON IRON AND STEEL (SECOND REVISION) (Reaffirmed 2006)	GMSCSSC-Current
2438	6105-005A : 2010 (Revision No.1)	IS 2223:1983 (Reaffirmed 2007) DIMENSIONS OF FLANGE MOUNTED AC INDUCTION MOTORS	ESSC-Superseded
2439	0169A-2005	IS 5623: 1999 (FIRST REVISION) REAFFIRMED 2004 METHOD FOR DETERMINATION OF CO-EFFICIENT OF LINEAR THERMAL EXPANSION OF GLASS	ISSC-Current
2440	5970-021A : 2005 Reaffirmed 2010	IS 7809: Part 3: Sec 2: 1981 (Reaffirmed 2007) PRESSURE SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES: PART 3 SPECIFICATIONS FOR INDIVIDUAL MATERIALS, SECTION 2 REQUIREMENTS FOR POLYESTER FILM TAPES (PETP) WITH THERMOSETTING ADHESIVE	ESSC-Superseded
2441	Misc - 0365A: 2010	IS 8306: 1976 REAFFIRMED 2007 AMD - 1 SPECIFICATION FOR CARBIDE TIPPED TWIST DRILLS, MORSE TAPER SHANK	EESSC-Current
2442	Misc - 0360A: 2010	IS 5927: 1981 (FIRST REVISION) REAFFIRMED 2007 SPECIFICATION FOR REDUCTION SLEEVES 7/24 TAPERS TO MORSE TAPERS	EESSC-Current
2443	5930-007A:2005 (Revision No.1) Reaffirmed 2010	IS 4165 :1991 (Reaffirmed 2006) THERMOSTATS FOR GENERAL PURPOSE ELECTRIC OVENS	ESSC-Current
2444	5950-003A:1987 Reaffirmed 2010	IS 5142:1969 CONTINUOUSLY VARIABLE VOLTAGE AUTO TRANSFORMERS	ESSC-Superseded
2445	3432-004A:1992 Reaffirmed 2010	IS 4804 (Part-IV) :1973 (Reaffirmed 2005) SPECIFICATION FOR RESISTANCE WELDING EQUIPMENT -PART-IV: SINGLE -PHASE STATIONARY, PRESS TYPE ROLL-SPOT AND SEAM WELDING MACHINES	ESSC-Superseded
2446	3432-002A:1992 Reaffirmed 2010	IS 4804 (Part-II) :1968 (Reaffirmed 2005) SPECIFICATION FOR RESISTANCE WELDING EQUIPMENT -PART-II:SINGLE -PHASE ROCKERARM SPOT WELDING MACHINES	ESSC-Superseded
2447	3431-002A:2005 (Revision No.1) Reaffirmed 2010	IS 2635:1997 (Reaffirmed 2007) DC ELECTRIC WELDING GENERATORS	ESSC-Current
2448	Misc-0952A:2003(Reaffirmed 2010)	IS 7429:1974 (Reaffirmed 2006) PROCEDURE FOR INSPECTION AND TESTING OF ALUMINIUM AND ALUMINIUM ALLOY EXTRUDED BARS,RODS AND SECTIONS FOR AIRCRAFT PURPOSE	AeroSSC-Superseded
2449	Misc-0951A:2003(Reaffirmed 2010)	IS 3420:1976 (Reaffirmed 2006) PROCEDURE FOR INSPECTION AND TESTING OF ALUMINIUM ALLOY SHEETS AND STRIPS FOR AIR CRAFT PURPOSES	AeroSSC-Superseded
2450	7110 - 01A: 2010	IS 550 (Part I): 2003 TITLE OF IS SAFES - (PART 1)	SSSC-Current