| 2451 |
1131 A:2014 (Revision No.1)
|
METHOD FOR DETERMINATION OF PLASTIC STRAIN RATIO 'R' FOR STEEL SHEETS |
| 2452 |
6105-004A : 2010 (Revision No.2)
|
IS 996:2009 SINGLE PHASE A.C. INDUCTION MOTORS FOR GENERAL PURPOSE |
| 2453 |
5930-006A:1988 Reaffirmed 2010
|
IS 3452 (Part 2) :1970 (Reaffirmed 2007) SPECIFICATION FOR TOGGLE SWITCHES - PART 2 : TOGGLE SWITCHES, TYPE I AND TYPE II |
| 2454 |
6750-018A-2005
|
IS 10290: 1982 REAFFIRMED 2004 CODE OF PRACTICE FOR PHOTOGEOLOGICAL INTERPRETATION AND MAPPING OF RIVER VALLEY PROJECT SITE |
| 2455 |
6650-030A-2005
|
IS 13108 (PART-1): 2002 (FIRST REVISION) REAFFIRMED 2007 OPTICS AND OPTICAL INSTRUMENTS - MICROSCOPES - PART-1: IMMERSION OIL FOR GENERAL USE IN LIGHT MICROSCOPY |
| 2456 |
6645-006A-2005
|
IS 9783: 1981 REAFFIRMED 2007 AMDS -2 NOMENCLATURE OF PARTS FOR WRIST WATCHES |
| 2457 |
6630-009A-1996
|
IS 12255: 1988 REAFFIRMED 2008 BAUME HYDROMETERS |
| 2458 |
6605-003A-1996
|
IS 5146: 1969 REAFFIRMED 2006 SPECIFICATION FOR SOUNDING SEXTANT |
| 2459 |
MISC 0814A:1999 (Reaffirmed 2012)
|
IS 14381: 1996 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES - ELECTRICAL CIRCUITS - RECOMMENDED GRAPHICAL SYMBOLS |
| 2460 |
7210-049A : 2011 (Revision No.1) Amendment 2
|
IS 1431 : 1973 TITLE OF IS COTTON MOSQUITO NETTING, ROUND MESH |
| 2461 |
MISC-1119A:2005 Reaffirmed 2012
|
IS 8812 (PART 1): 1978 METHODS FOR CHEMICAL ANALYSIS OF HARD SOLDERS FOR JOINTING ALUMINIUM AND ALUMINIUM ALLOYS, PART 1 DETERMINATION OF SILVER, COPPER, ZINC, ANTIMONY, ARSENIC, IRON AND BISMUTH REAFFIRMED 2008 |
| 2462 |
MISC-1115A:2005 Reaffirmed 2012
|
IS 4667 (PART 1): 1968 METHODS OF CHEMICAL ANALYSIS OF SILVER COPPER BRAZI NG ALLOYS PART 1 ANALYSIS FOR SILVER AND COPPER REAFFIRMED 2007 |
| 2463 |
6515-139A : May 1988 Reaffirmed 2010
|
IS - 6989: 1973 Reaffirmed 2003 |
| 2464 |
Misc - 0359A: 2010
|
IS 5444: 1978 (FIRST REVISION) Reaffirmed 2007 (AMDS - 2) SPECIFICATION FOR PARALLEL HAND REAMERS WITH PARALLEL SHANKS |
| 2465 |
5950-006A:1999 (Revision No.1) Reaffirmed 2010
|
IS 2705 (Part 4):1992 (Reaffirmed 2007) CURRENT TRANSFORMERS: PART 4 PROTECTIVE CURRENT TRANSFORMERS FOR SPECIAL PURPOSE APPLICATIONS |
| 2466 |
5930-005A:1988 Reaffirmed 2010
|
IS 3452 (Part 1) :1966 (Reaffirmed 2007) SPECIFICATION FOR TOGGLE SWITCHES - PART I : GENERAL REQUIREMENTS AND TESTS |
| 2467 |
4210-012A:2005 (Revision No.1) Reaffirmed 2010
|
IS 1646:1997 (Reaffirmed 2007) CODE OF PRACTICE FOR FIRE SAFETY OF BUILDINGS (GENERAL) : ELECTRICAL INSTALLATIONS |
| 2468 |
3431-003A:1996 Reaffirmed 2010
|
IS 6008:1989 (Reaffirmed 2009) ARC WELDING POWER SOURCE, SINGLE OPERATOR RECTIFIER TYPE AC AND DC-SPECIFICATION |
| 2469 |
5306 - 08A: 2010
|
IS 1363 (Part I): 2002 TITLE OF IS HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - (PART 1) : HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64) |
| 2470 |
5130-008A: 2005 Reaffirmed 2012
|
IS 5364: 1969 Reaffirmed 2008 SPECIFICATION FOR TWIST DRILLS FOR TAPER PIN HOLES WITH TAPER 1:50 |
| 2471 |
5130-007A: 2005 Reaffirmed 2012
|
IS 5363: 1983 (First Revision) Reaffirmed 2008 SPECIFICATION FOR MICRO-DRILLS |
| 2472 |
MISC 0815A:1999 (Reaffirmed 2007) (Withdrawn 2012)
|
IS 14382: 1996 (Reaffirmed 2006) TITLE OF IS: AUTOMOTIVE VEHICLES - SPEED LIMITERS - SPECIFICATION FOR INSTALLED REQUIREMENTS |
| 2473 |
6810-014 A: 2012 (Revision No. 1)
|
IS 3504 : 2006 TITLE OF IS : THYMOL |
| 2474 |
8315-001A: 2011 (Revision No.1)
|
IS 1895: 1982 TITLE OF IS TAPE NEWAR |
| 2475 |
Misc - 0358A: 2010
|
IS 5366: 1978 (FIRST REVISION) Reaffirmed 2007 (AMDS - 2) SPECIFICATION FOR CORE DRILLS, MORSE TAPER SHANKS |
| 2476 |
5935-002A:2010 (Revision No.2)
|
IS 1293:2005 PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO AND INCLUDING 16 AMPERES - SPECIFICATION |
| 2477 |
0077A-1995
|
IS 1448 (PART-16): 1990 (THIRD REVISION) REAFFIRMED 2007 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS: PART- 16 DENSITY, RELATIVE DENSITY OR API GRAVITY OF CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS BY HYDROMETER METHOD |
| 2478 |
Misc - 0361A: 2010
|
IS 7772: 1975 REAFFIRMED 2007 AMD -1 SPECIFICATION FOR SHELL CORE DRILLS |
| 2479 |
5306 - 06A: 2010
|
IS 1366: 2002 TITLE OF IS SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE-A |
| 2480 |
6625-006A : 1987 (Reaffirmed 2010)
|
SPECIFICATION FOR NEON TESTERS |
| 2481 |
MISC 0812A:1999 (Reaffirmed 2012)
|
IS 14346 (Part 1) : 1996 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES - PASSENGER CARS VERIFICATION OF DRIVERS DIRECT FIELD OF VIEW (PART 1) VEHICLE POSITIONING FOR STATIC MEASUREMENT |
| 2482 |
2520-013A: 2007 (Reaffirmed 2012)
|
IS 12535 (Part 3) : 1991 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES- TRANSMISSION SYSTEMS- GLOSSARY- PART 3 DRIVE AXLES DEFINITION |
| 2483 |
MISC 0837A : 2000 (Reaffirmed 2007) (Withdrawn 2012)
|
IS 14272(Part I) : 1995/ISO 3833:1977 (Reaffirmed 2005) TITLE OF IS: AUTOMOTIVE VEHICLES - TYPES - TERMINOLOGY PART 1 THREE AND FOUR WHEELERS |
| 2484 |
MISC 0827A: 2000 (Reaffirmed 2012)
|
IS 8098 (Part 2): 1981 (Reaffirmed 2007) TITLE OF IS : CODE OF PRACTICE FOR FINISHING OF AUTOMOBILE BODIES PART-2 REFINISHING OF PASSENGER CARS |
| 2485 |
MISC 0813A:1999 (Reaffirmed 2012)
|
IS 14346 (Part 2) : 1996 (Reaffirmed 2006) TITLE OF IS : AUTOMOTIVE VEHICLES - PASSENGER CARS VERIFICATION OF DRIVERS DIRECT FIELD OF VIEW (PART 2) METHOD OF TEST |
| 2486 |
MISC - 0901A: 2000 (Reaffirmed 2010)
|
IS 1572:1986 TITLE OF IS : SPECIFICATION FOR ELECTROPLATED COATINGS OF CADMIUM ON IRON AND STEEL (SECOND REVISION) (Reaffirmed 2006) |
| 2487 |
6105-005A : 2010 (Revision No.1)
|
IS 2223:1983 (Reaffirmed 2007) DIMENSIONS OF FLANGE MOUNTED AC INDUCTION MOTORS |
| 2488 |
0169A-2005
|
IS 5623: 1999 (FIRST REVISION) REAFFIRMED 2004 METHOD FOR DETERMINATION OF CO-EFFICIENT OF LINEAR THERMAL EXPANSION OF GLASS |
| 2489 |
5970-021A : 2005 Reaffirmed 2010
|
IS 7809: Part 3: Sec 2: 1981 (Reaffirmed 2007) PRESSURE SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES: PART 3 SPECIFICATIONS FOR INDIVIDUAL MATERIALS, SECTION 2 REQUIREMENTS FOR POLYESTER FILM TAPES (PETP) WITH THERMOSETTING ADHESIVE |
| 2490 |
Misc - 0365A: 2010
|
IS 8306: 1976 REAFFIRMED 2007 AMD - 1 SPECIFICATION FOR CARBIDE TIPPED TWIST DRILLS, MORSE TAPER SHANK |
| 2491 |
Misc - 0360A: 2010
|
IS 5927: 1981 (FIRST REVISION) REAFFIRMED 2007 SPECIFICATION FOR REDUCTION SLEEVES 7/24 TAPERS TO MORSE TAPERS |
| 2492 |
5930-007A:2005 (Revision No.1) Reaffirmed 2010
|
IS 4165 :1991 (Reaffirmed 2006) THERMOSTATS FOR GENERAL PURPOSE ELECTRIC OVENS |
| 2493 |
5950-003A:1987 Reaffirmed 2010
|
IS 5142:1969 CONTINUOUSLY VARIABLE VOLTAGE AUTO TRANSFORMERS |
| 2494 |
3432-004A:1992 Reaffirmed 2010
|
IS 4804 (Part-IV) :1973 (Reaffirmed 2005) SPECIFICATION FOR RESISTANCE WELDING EQUIPMENT -PART-IV: SINGLE -PHASE STATIONARY, PRESS TYPE ROLL-SPOT AND SEAM WELDING MACHINES |
| 2495 |
3432-002A:1992 Reaffirmed 2010
|
IS 4804 (Part-II) :1968 (Reaffirmed 2005) SPECIFICATION FOR RESISTANCE WELDING EQUIPMENT -PART-II:SINGLE -PHASE ROCKERARM SPOT WELDING MACHINES |
| 2496 |
3431-002A:2005 (Revision No.1) Reaffirmed 2010
|
IS 2635:1997 (Reaffirmed 2007) DC ELECTRIC WELDING GENERATORS |
| 2497 |
Misc-0952A:2003(Reaffirmed 2010)
|
IS 7429:1974 (Reaffirmed 2006) PROCEDURE FOR INSPECTION AND TESTING OF ALUMINIUM AND ALUMINIUM ALLOY EXTRUDED BARS,RODS AND SECTIONS FOR AIRCRAFT PURPOSE |
| 2498 |
Misc-0951A:2003(Reaffirmed 2010)
|
IS 3420:1976 (Reaffirmed 2006) PROCEDURE FOR INSPECTION AND TESTING OF ALUMINIUM ALLOY SHEETS AND STRIPS FOR AIR CRAFT PURPOSES |
| 2499 |
7110 - 01A: 2010
|
IS 550 (Part I): 2003 TITLE OF IS SAFES - (PART 1) |
| 2500 |
Misc-0560A: 2004 (Revision No.1) (Reaffirmed 2010)
|
IS 13353: 1992 (Reaffirmed 2007) TITLE OF IS : AUTOMOTIVE VEHICLES - GARAGE EQUIPMENTS - TECHNICAL PARAMETERS |
