© 2019 Directorate of Standardisation. All rights reserved
JSPR Document
| S.No | Document No. | Nomenclature | Standardisation Sub-Committee |
|---|---|---|---|
| 1 | 3445-01:2018 (Fourth Revision) | Shearing Machines Metal Slitting - Capacities | EESSC-Current |
| 2 | 3443-01 :2018 (Fourth Revision) | Press Punch Power Operated - Capacities | EESSC-Current |
| 3 | 3446-01: 2010 (Second Revision) Reaffirmed 2016 | Hammer Bumping Power - Capacities | EESSC-Current |
| 4 | 3413-01 :2016 (Fourth Revision) | Drilling Machines - Capacities | EESSC-Current |
| 5 | 3220-01 :2017 (Third Revision) | Saw Circular - Capacities | EESSC-Current |
| 6 | 5133-02 :2016 (Fifth Revision) | Bits Auger Carpenter | EESSC-Current |
| 7 | 3416-01 :2016 (Fourth Revision) | Lathes Metal Working - Machines | EESSC-Current |
| 8 | 5120-09 :2016 (Revision no. 2) | Trowel | SSSC-Current |
| 9 | 8115-01: 2016 (Revision No. 3) | CRATES | SSSC-Current |
| 10 | 8405-01: 1982 (Reaffirmed - 2016) | APRONS | SSSC-Current |
| 11 | 5925-01 : 2016 (Second Revision) | CIRCUIT BREAKERS, a.c., SINGLE PHASE & THREE PHASE FROM 6 A TO 2500 A (DS CLASS 5925) | ESSC-Current |
| 12 | 5920-01 : 2016 (Third Revision) | FUSE LINK, CARTRIDGE, FERRULE CONTACT TYPE, 250 V, a.c) | ESSC-Current |
| 13 | 5930-01 : 1981 Reaffirmed 2016 | SWITCH TOGGLE (SPST, SPDT, DPST & DPDT) 250 V, a.c., 2, 3, 4, 5, 10 & 15 Amps (DS CLASS 5930), 1A (DS CAT No.Y3/6145, 005956, Y3/6145 005957,Y3/6145 005958, Y3/6145 005959) | ESSC-Current |
| 14 | 5920-02 : 1982 Reaffirmed 2016 | FUSE LINKS, CARTRIGE, FERRULE CONTACT TYPE, 440 V, a.c. | ESSC-Current |
| 15 | 5120-09: 2016(Revision No. 2) | TROWEL | SSSC-Current |
| 16 | 9525-01 : 2010(Revision No. 3)Reaffirmed 2016 | WIRE, COMMERCIAL BRASS | MSSC-Current |
| 17 | 5120-02: 2015 (Revision No. 3) | SPANNER | SSSC-Current |
| 18 | 5110 - 12 : 2014(Revision No. 3) | KNIVES | SSSC-Current |
| 19 | 5530 - 01 : 2014(Rev No.3) | PLYWOOD AND VENEER | SSSC-Current |
| 20 | 5110 - 12 : 2014(Rev No.3) | KNIVES | SSSC-Current |
| 21 | 8315 - 01 : 2014(Rev No.2) | NEEDLES | SSSC-Current |
| 22 | 8440 - 01 : 1983(RA 2013) | GLOVES | SSSC-Current |
| 23 | 7220 - 01 : 2014(Rev No.3) | LINOLEUM SHEET | SSSC-Current |
| 24 | 5110 - 05 : 2014(Rev No.3) | GOUGE, FIRMER | SSSC-Current |
| 25 | 5120 - 03 : 2008(Rev No.2)Reaffirmed2013 | FLATTERS SMITH'S | SSSC-Current |
| 26 | 5120 - 06 : 2008(Rev No.2)Reaffirmed2013 | CROW BAR | SSSC-Current |
| 27 | 4020 - 01 : 2013(Rev No.3) | ROPES | SSSC-Current |
| 28 | 6625 - 05 : 2014(Rev No.1) | METERS, ELECTRICAL FREQUENCY (45 to 1150 Hz) | ESSC-Current |
| 29 | 6105 - 03 : 2014(Rev No.1) | MOTORS, DIRECT CURRENT, 0.06 TO 110 KW | ESSC-Current |
| 30 | 6105 - 02 : 2014(Rev No.1) | MOTORS, AC, 230 / 240 V, SINGLE PHASE, 50 HZ (FROM 12 TO 1500 W) | ESSC-Current |
| 31 | 9330 - 01 : 2013(Rev No.2) | POLYTHENE FILMS VARIOUS | SSSC-Current |
| 32 | 4730-01:2005 Revision No.2 (Supersedes JSPR 4730-01: 1994) (Revision No.1) | CLAMP, HOSE | VSSC-Superseded |
| 33 | 5315-01:2008(Rev No.2) Reaffirmed 2014 | LIST OF MEMBERS ASSOCIATED WITH FORMULATION OF THIS STANDARD | SSSC-Current |
| 34 | 2320-01:2006 | B' VEHICLES | VSSC-Superseded |
| 35 | 3442-01: 1999 (Revision No. 1) Reaffirmed 2006 | PRESSES, FORGING, HYDRAULIC | EESSC-superseded |
| 36 | 5120-11: 2004 (Revision No. 1) | VICES | SSSC-Superseded |
| 37 | 5110-09: 2007 (Revision No. 1) | BLADE, HAND, HACKSAW | SSSC-Superseded |
| 38 | 5925-01: 1980 Reaffirmed 1992 Reaffirmed 1999 Reaffirmed 2005 | DS CLASS: 5925 CIRCUIT BREAKERS. Single Phase & Three Phase From 6 To 2500 A | ESSC-Superseded |
| 39 | 5920-01: 1999 (Revision No 1) Reaffirmed 2005 | FUSE LINK, CARTRIDGE, FERRULE CONTACT TYPE, 250V, ac | ESSC-Superseded |
| 40 | 8115-01: 2004(Revision No. 1) | CRATES | SSSC-Superseded |
| 41 | 5120-09: 2010(Revision No. 1) | TROWEL | SSSC-Superseded |
| 42 | 4310-01:2003 (Revision No. 1) | COMPRESSORS, AIR | EESSC-superseded |
| 43 | 9525-01:2002 (Revision No. 2) | WIRE, COMMERCIAL BRASS | MSSC-Superseded |
| 44 | 3416-01:2003 (Revision No. 2) | LATHES, METAL WORKING (CAPACITIES) | EESSC-superseded |
| 45 | 3220-01:2003 (Revision No. 1) | SAW, CIRCULAR (CAPACITIES) | EESSC-superseded |
| 46 | 6105-03: 1981 Reaffirmed 1999 | DS CLASS 6105 MOTORS, DIRECT CURRENT, 0.06 TO 110 kW | ESSC-Superseded |
| 47 | 3441-01: 1997 (Revision No. 1) Reaffirmed 2004 | FORMING MACHINE, SHEET METAL, SLIP ROLL | EESSC-superseded |
| 48 | 3446-01:2003 (Revision No. 1) | HAMMER, BUMPING, POWER (CAPACITIES) | EESSC-superseded |
| 49 | 5920-02: 1982 Reaffirmed 1999 | DS CLASS:5920 FUSE LINKS, CARTRIGE, FERRUTE CONTACT TYPE, 440V, ac | ESSC-Superseded |
| 50 | 6625-05: 1987 Reaffirmed 1999 | DS CLASS 6625 METERS, ELECTRICAL FREQUENCY (45 to 50 Hz) | ESSC-Superseded |