© 2019 Directorate of Standardisation. All rights reserved
JSS Document
| S.No | Document No. | Nomenclature | Standardisation Sub-Committee |
|---|---|---|---|
| 1 | 6145-05 : 2018 (Rev 3) | CABLES, ELECTRICAL, TERSIL, TYPE | ESSC-Current |
| 2 | 6130-15 : 2019 (Rev 2) | ON LINE UNINTERRUPTED POWER SUPPLY SYSTEM 415 V, 50 Hz, 3 PHASE, 4 WIRE | ESSC-Current |
| 3 | 6130-09 : 2019 (Rev 3) | CHARGER, BATTERY, INPUT 240 V, ac, SINGLE PHASE, 50 Hz, OUTPUT, dc, 48 V, 10 A | ESSC-Current |
| 4 | 6130-07: 2019 (Rev 3) | PANEL, ELECTRICAL, EQUIPMENT (BATTERY CHARGING PANEL) | ESSC-Current |
| 5 | 6125-02 : 2019 (Third Rev) | INVERTER POWER STATIC 2.5 kVA | ESSC-Current |
| 6 | 6115-07 : 2019 (Rev 4) | GENERATOR SET DIESEL ENGINE, TRAILER MOUNTED 19 kVA, 415 V, THREE PHASE 50 Hz | ESSC-Current |
| 7 | 6115-05 : 2019 (Rev 4) | ALTERNATOR, MAIN BRUSHLESS, 450 V, 50 Hz/60 Hz, 500 kW, 750 kW and 1000 kW | ESSC-Current |
| 8 | 6115-01 : 2019 (Fourth Revision) | ALTERNATORS (2.5 kVA to 60 kVA) | ESSC-Current |
| 9 | 6110-03 : 2019 (Rev 2) | Starter, Motor, dc | ESSC-Current |
| 10 | 6105-04: 2019 (Rev 4) | Three Phase Induction Motors Up to And Including 11kV | ESSC-Current |
| 11 | 6105-01: 2019 (Rev 4) | General Requirements For Motors, Direct Current | ESSC-Current |
| 12 | 5999-02 : 2019 (Rev 2) | Clip , Electrical , Battery Charging | ESSC-Current |
| 13 | 5999-01 : 2019 (Rev 2) | Clip Electrical | ESSC-Current |
| 14 | 5970-01 : 2019 (Rev 4) | Ceramic Insulating Beads | ESSC-Current |
| 15 | 5920-01 : 2019 (Rev 3) | Junction Boxes | ESSC-Current |
| 16 | 4540-01 : 2019 (Rev 4) | Heating Elements, Electrical, Multipurpose "Applications" | ESSC-Current |
| 17 | 3431-03 : 2018 (Fourth Revision) | Welding Machine, Arc, Transportable Light Duty, 9 kVA | ESSC-Current |
| 18 | 6515-51 : 2019 (Rev 5) | Probe, Aural or Nasal (Jobson Horne's) | MedSSC-Current |
| 19 | 6515-35: 2019 (5th Rev) | Scissors Straight (Mayo) 19 cm | MedSSC-Current |
| 20 | 6515-31: 2019 (5th REV) | Forceps, Aural, Dressing (Lucae's) | MedSSC-Current |
| 21 | 6515-20 : 2019 (fifth Rev) | Needle, Aneurysm, Small | MedSSC-Current |
| 22 | 6515-15 : 2019 (Rev 5) | Apparatus, Suction, Foot Action Purves, Complete | MedSSC-Current |
| 23 | 1376-10 : 2017 (Third Revision) | Nitrocellulose | ASSC-Current |
| 24 | 1376-10: 2017 (Third Revision) | Nitrocellulose | ASSC-Current |
| 25 | 1376-10 : 2017 (Third Revision) | Nitrocellulose | ASSC-Current |
| 26 | 4320-08 : 2019 | Active Fuel Transfer Pump (NSN 4320720472021) | AeroSSC-Current |
| 27 | 5320-08 : 2019 | 120° Flush Head Oversize Dia Rivet CR 3246 (Multiple NSN) | AeroSSC-Curren |
| 28 | 9150-087 : 2013 Reaffirmed 2019 | Synthetic Grease, General Purpose Graphite Lubricant (Type JSD : XG-273) | AeroSSC-Current |
| 29 | 9150-86 : 2013 Reaffirmed 2019 | Aircraft Grease For Helicopter Oscillating Bearing : XG-284 | AeroSSC-Current |
| 30 | 9150-83 : 2013 Reaffirmed 2019 | Lubricant For Aircraft Flying Controls Low Temperature Applications | AeroSSC-Current |
| 31 | 8010-104 : 2019 | Oxidation Resistant Coating Of Turbine Blades By Paint Method | AeroSSC-Current |
| 32 | 5330-17 : 2013 Reaffirmed 2019 | Canopy Seal For MIG 27 | AeroSSC-Current |
| 33 | 5330-16 : 2013 Reaffirmed 2019 | Canopy Seal For MIG 21 | AeroSSC-Current |
| 34 | 5320-10 : 2019 | MBF 2112-Blind Fastener 100° Flush Head For Composites (Multiple NSN) | AeroSSC-Current |
| 35 | 5320-09 : 2019 | MBF 2110- Blind Fastener Protruding Head For Composites (Multiple NSN) | AeroSSC-Current |
| 36 | 5320-07 : 2019 | Universal Head Oversize Dia Rivet CR 3243 (Multiple NSN) | AeroSSC-Current |
| 37 | 5320-03: 2019 (Second Revision) | Rivet Solid Universal Head HS 1006 (Multiple NSN) | AeroSSC-Current |
| 38 | 5320-02 : 2019 (Second Revision) | 100° Countersunk Head Rivet Truncated Radius Head HS 1005 | AeroSSC-Current |
| 39 | 3110-01 : 2013 (First Revision) Reaffirmed 2019 | Qualification Of Ball Bearings | AeroSSC-Current |
| 40 | 1630-22 : 2019 | Jaguar Insulator | AeroSSC-Current |
| 41 | 9150-45 : 2017(Fourth Revision) | Ammunition Protective Composition No. 12 Grease Ammunition | ASSC-Current |
| 42 | 9110-144 : 2018 (Second Revision) | Charcoal Type - I, Type - II And Type - III | ASSC-Current |
| 43 | 8305-34 : 2017 (Second Revision) | Net Nylon | ASSC-Current |
| 44 | 8305-27 : 2017 (Second Revision) | Cloth Cotton Gauze | ASSC-Current |
| 45 | 8305-24 : 2017 (Fourth Revision) | Webbing Silk | ASSC-Current |
| 46 | 8305-20 : 2017 (Fourth Revision) | Cloth All Worsted | ASSC-Current |
| 47 | 8305-18 : 2017 (Fourth Revision) | Webbing Cotton | ASSC-Current |
| 48 | 8305-02 : 2017 (Fourth Revision) | Fabric For Parachutes, Star Shell | ASSC-Current |
| 49 | 8140-03 : 2017(Fourth Revision) | Drum, Fiber, TNT (25 kg) | ASSC-Current |
| 50 | 8135-05 : 2017(Fifth Revision) | Paper, Wrapping, Waxed Kraft Ammunition | ASSC-Current |