AN Document
| S.No | Document No. | Nomenclature | Standardisation Sub-Committee |
|---|---|---|---|
| 3551 | 9535-012 A : 2005 Revision No. 1 Reaffirmed 2013 | IS 2283: 2000 NICKEL - SILVER SHEET, STRIP SPECIFICATON (SECOND REVISION) REAFFIRMED 2011 | MSSC-Current |
| 3552 | 4710-015A:2005 Reaffirmed 2011 | IS 7285: 1988 SPECIFICATION FOR SEAMLESS STEEL CYLINDERS FOR PERMANENT AND HIGH PRESSURE LIQUEFIABLE GASES (SECOND REVISION) REAFFIRMED 2002 AMDS 5 | MSSC-Current |
| 3553 | MISC - 0327A: 1998 Reaffirmed 2011 | IS 5903: 1970 Reaffirmed 2006 RECOMMENDATIONS FOR SAFETY DEVICES FOR GAS CYLINDERS | EESSC-Current |
| 3554 | MISC - 0326A: 1998 Reaffirmed 2011 | IS 5845: 1993 (second revision) Reaffirmed 2007 CODE OF PRACTICE FOR INSPECTION OF LOW PRESSURE WELDED STEEL GAS CYLINDERS OTHER THAN LPG CYLINDERS IN USE | EESSC-Current |
| 3555 | MISC - 0323A: 1998 Reaffirmed 2011 | IS 6498: 1971 Reaffirmed 2006 GLOSSARY OF TERMS USED IN CONNECTION WITH PULLEY BLOCKS | EESSC-Current |
| 3556 | 4210-004A: 2004 (Revision No. 1) Reaffirmed 2011 | IS 3224: 2002 (third revision) Reaffirmed 2007 Amendments 2 VALVE FITTING FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - SPECIFICATION | EESSC-Superseded |
| 3557 | 4030-009A: 2004 Reaffirmed 2011 | IS 6132: 2003 (first revision) reaffirmed 2009 FORGED SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES | EESSC-Current |
| 3558 | MISC - 0324A: 1998 Reaffirmed 2011 | IS 6549: 1972 Reaffirmed 2006 GLOSSARY OF TERMS USED IN CONNECTION WITH LIFTING TACKLE | EESSC-Current |
| 3559 | MISC 0319A: 2011 (Revision No. 1) | IS 3459: 2004 (second revision) SMALL WIRE ROPES - SPECIFICATION | EESSC-Superseded |
| 3560 | 4030-004A: 1996 Reaffirmed 2011 | IS 2762: 1983 (first revision) reaffirmed 2006 SPECIFICATION FOR WIRE ROPES SLINGS AND SLING LEGS | EESSC-Superseded |
| 3561 | 4010-004A: 2011 (Revision No. 1) | IS 1856: 2005 (third revision) (Amendment 1) STEEL WIRE ROPES FOR HAULAGE PURPOSES - SPECIFICATION | EESSC-Current |
| 3562 | 3950-001A: 1996 Reaffirmed 2011 | IS 3938: 1983 (second revision) Reaffirmed 2008 SPECIFICATION FOR ELECTRIC WIRE ROPE HOISTS | EESSC-Superseded |
| 3563 | 3895-008A: 2004 Reaffirmed 2011 | IS 2094 (Part-2): 1999 Reaffirmed 2005 SPECIFICATION FOR HEATER FOR BITUMEN (TAR) AND EMULSION PART 2 : BITUMEN SPRAYER | EESSC-Superseded |
| 3564 | 3895-004A: 1996 Reaffirmed 2011 | IS 3251: 1965 Reaffirmed 2007 SPECIFICATION FOR HOT ASPHALT MIXING PLANTS | EESSC-Superseded |
| 3565 | 3810-001A: 2011 (Revision No. 1) | IS 3832: 2005 (third revision) (Amendment 1) HAND - OPERATED CHAIN PULLEY BLOCKS - SPECIFICATION | EESSC-Superseded |
| 3566 | MISC 1023A : 2011 | IS 11509: Part 6: 2006/ ISO 4548-5 : 1990 TITLE OF IS: METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES PART 6 COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY TEST | VSSC-Superseded |
| 3567 | 4720-009A : 2011 | IS 635: 1982 (Reaffirmed 2006 & Amd 1) TITLE OF IS :SPECIFICATION FOR OIL AND SOLVENT RESISTANT HOSE OF RUBBER | VSSC-Current |
| 3568 | 2530-042A : 2011 | IS 13196 : 1991 (Reaffirmed 2007) TITLE OF IS: AUTOMOTIVE VEHICLES - LIGHT ALLOYS WHEEL FOR MOTORCYCLES - SPECIFICATION | VSSC-Current |
| 3569 | 8010-089A: 1999 Reaffirmed 2011 | IS 6948 : 1973 TITLE OF IS READY MIXED PAINT, UNDERCOAT, SYNTHETIC FOR SHIPS | SSSC-Current |
| 3570 | 8010-088A: 1999 Reaffirmed 2011 | IS 6951: 1973 TITLE OF IS READY MIXED PAINT, FINISHING, EXTERIOR, FOR SHIPS | SSSC-Current |
| 3571 | 8010-082A: 1998 Reaffirmed 2011 | IS 159 : 1981 TITLE OF IS READY MIXED PAINT, BRUSHING, ACID RESISTING | SSSC-Superseded |
| 3572 | 8010-067A: 1993 Reaffirmed 2011 | IS 423: 1961 TITLE OF IS PLASTIC WOOD FOR JOINERS FILLER | SSSC-Superseded |
| 3573 | 8010-066A: 1993 Reaffirmed 2011 | IS 411: 1991 TITLE OF IS TITANIUM DIOXIDE, ANATASE, FOR PAINTS | SSSC-Current |
| 3574 | 6810-060A: 1995 Reaffirmed 2011 | IS 1796: 1986 TITLE OF IS GLYCERINE | SSSC-Current |
| 3575 | 6810-059A: 1993 Reaffirmed 2011 | IS 229: 1993 TITLE OF IS ETHYL ACETATE | SSSC-Current |
| 3576 | 6810-055A: 1991Reaffirmed 2011 | IS 323: 1959 TITLE OF IS RECTIFIED SPIRIT | SSSC-Superseded |
| 3577 | 0174A : 1996 | IS 12257: PART 4: 1992 REAFFIRMED 2006 PNEUMATIC MEASUREMENT - SPECIFICATION PART 4 GENERAL INFORMATION AND EXAMPLES OF APPLICATION | ISSC-Superseded |
| 3578 | 0173A : 1996 | IS 12257: PART 3: 1992 REAFFIRMED 2006 PNEUMATIC MEASUREMENT:PART 3 PARAMETERS OF INSTRUMENTS WORKING ON HIGH PRESSURE | ISSC-Superseded |
| 3579 | 0172A : 1996 | IS 12257: PART 2: 1992 REAFFIRMED 2006 PNEUMATIC MEASUREMENT:PART 2 DESIGN FEATURES OF INSTRUMENTS WORKING IN HIGH PRESSURE RANGE | ISSC-Superseded |
| 3580 | 0171A : 1996 | IS 12257: PART 1: 1987 REAFFIRMED 2006 SPECIFICATION FOR PNEUMATIC LENGTH MEASUREMENT COMPARATORS - PART 1 : GENERAL INFORMATION ON PRINCIPLES AND METHODS | ISSC-Superseded |
| 3581 | 6750-022A-2006 | IS 14622: 1998 REAFFIRMED 2003 PHOTOGRAPHY - ELECTRONIC FLASH EQUIPMENT - AUTOMATIC CONTROL OF EXPOSURE | ISSC-Current |
| 3582 | 6675-023A : 1983 | IS 3221: 1966 REAFFIRMED 2006 SETS FOR DRAWING INSTRUMENTS | ISSC-Superseded |
| 3583 | 6675-022A-1983 | IS 3219: 1966 REAFFIRMED 2006 SPECIFICATION FOR ENGINEERS' DRAWING INSTRUMENTS, BOXES FOR LEADS AND NEEDLES | ISSC-Current |
| 3584 | 6675-021A-1983 | IS 3218: 1968 REAFFIRMED 2009 SPECIFICATION FOR PARALLEL RULERS, 150 MM (LINK TYPE) | ISSC-Current |
| 3585 | 6675-011A-1983 | IS 2288: 1963 REAFFIRMED 2006 SPECIFICATION FOR RANGING RODS | ISSC-Current |
| 3586 | 257A-2011 | IS 9001: PART X: 1975 REAFFIRMED 2007 AMD -1 GUIDANCE FOR ENVIRONMENTAL TESTING - PART X MOULD GROWTH TEST | ISSC-Current |
| 3587 | 256A-2011 | IS 9001: PART IX: 1981 REAFFIRMED 2006 GUIDANCE FOR ENVIRONMENTAL TESTING - PART IX SOLDERABILITY AND RESISTANCE TO SOLDERIIUG HEAT | ISSC-Current |
| 3588 | 255A-2011 | IS 9001: PART VIII: 1982 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING - PART VIII SEALING TEST | ISSC-Current |
| 3589 | 254A-2011 | IS 9001: PART VII: 1980 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING - PART VII SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS | ISSC-Current |
| 3590 | 253A-2011 | IS 9001: PART 6: 1980 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING: PART 6 HYDROGEN SULPHIDE TEST FOR CONTACTS AND CONNECTIONS | ISSC-Current |
| 3591 | 252A-2011 | IS 9001: PART V: 1979 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING - PART V RESISTANCE TO CLEANING SOLVENTS AND PERMANENCE OF MARKINGS | ISSC-Current |
| 3592 | 251A-2011 | IS 9001: PART IV: 1979 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING - PART IV DAMP HEAT TESTS | ISSC-Current |
| 3593 | 250A-2011 | IS 9001: PART 3: 1978 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING: PART 3 CHANGE OF TEMPERATURE | ISSC-Current |
| 3594 | 249A-2011 | IS 9001: PART 2: 1977 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING: PART 2 COLD AND DRY HEAT TESTS | ISSC-Current |
| 3595 | 248A-2011 | IS 9001: PART 1: 1984 REAFFIRMED 2007 GUIDANCE FOR ENVIRONMENTAL TESTING: PART 1 GENERAL | ISSC-Current |
| 3596 | MISC - 0918A: 2011 | IS 2102: Part 1: 1993/ISO 2768-1: 1989 TITLE OF IS: GENERAL TOLERANCES PART 1 TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS (THIRD REVISION) (REAFFIRMED 2008) | GMSCSSC-Current |
| 3597 | MISC - 0906A: 2004 (Revision No. 1) (Reaffirmed 2011) | IS 10117: 2000 (Reaffirmed 2006) TITLE OF IS:CODE OF PRACTICE FOR PASSIVATION OF STAINLESS STEEL ARTICLES, INDUSTRIAL EQUIPMENTS AND COMPONENTS INCLUDING PIPE LINES | GMSCSSC-Current |
| 3598 | MISC - 0904A: 2000 (Reaffirmed 2011) | IS 9839: 1981 (Reaffirmed 2006) TITLE OF IS: CHROMATE CONVERSION COATINGS ON ELECTROPLATED ZINC AND CADMIUM COATINGS | GMSCSSC-Current |
| 3599 | MISC - 0903A: 2000 (Reaffirmed 2011) | IS 3664: 1981 (First Revision) (Reaffirmed 2003) TITLE OF IS:CODE OF PRACTICE FOR ULTRASONIC PULSE ECHO TESTING BY CONTACT AND IMMERSION METHODS | GMSCSSC-Current |
| 3600 | 7920 Misc 0473A : 2011 | IS 384 : 2002 TITLE OF IS: BRUSHES, PAINTS AND VARNISHES, FLAT | SSSC-Superseded |