851 |
0404 : 2007 (Revision N0. 2)
|
PAINTS (Group Class: 8010) |
852 |
0871 : 2012 (Revision No 1) Supersedes JSG 0871 : 2005
|
USER AUTHENTICATION |
853 |
0555: 2006 (Revision No. 1)
|
POLICY ON DISPOSAL OF BIO-MEDICAL WASTE IN THE ARMED FORCES |
854 |
0554 Withdrawn
|
Patient Care Services |
855 |
0553: 2006 (Revision No. 1)
|
HOSPITAL WASTE MANAGEMENT |
856 |
9535-04:2009 Revision No. 1
|
SOLUTION TREATED AND PRECIPITATION HARDENABLE ALUMINIUM ALLOY: PLA |
857 |
9515-11:2001 Reaffirmed 2007
|
PROCEDURE FOR CARRYING OUT BALLISTIC TEST FOR HOMOGENEOUS JACKAL ARMOUR STEEL PLATES 4 MM TO 20 MM NOMINAL THICKNESS |
858 |
0459-01 (Part 2) : 2013 Revision No. 3
|
BRASSES (Part 2 : Plates, Sheets, Strips, Foils and Structural Shapes)q |
859 |
0459-01 (Part 1) : 2013 Revision No. 3
|
BRASSES (Part 1: WIRES, RODS AND BARS) |
860 |
0462-01 : 2013 Revision No. 2
|
COPPER : WIRE, BARS, RODS, TUBES, PLATES, SHEETS AND FOILS |
861 |
0458-01 : 2013 Revision No. 2
|
ALUMINIUM AND ALUMINIUM ALLOYS WIRES, BARS, RODS, PIPES, TUBES, PLATES, SHEETS, STRIPS AND STRUCTURAL SHAPES |
862 |
0457-01 (Part 3) : 2013 (Revision No. 2)
|
TREATMENT FOR PROTECTION OF METAL PARTS OF SERVICE STORES AND EQUIPMENTS AGAINST CORROSION PART 3 : METALLIC AND ALLIED FINISHES ON NON - FERROUS METALS |
863 |
0457-01 (Part 2) : 2013 (Revision No. 2)
|
TREATMENT FOR PROTECTION OF METAL PARTS OF SERVICE STORES, AND EQUIPMENT AGAINST CORROSION PART 2 : METALLIC AND ALLIED FINISHES ON IRON AND STEEL |
864 |
0457-01 (Part 1): 2007 Revision No. 1
|
TREATMENTS FOR PROTECTION OF METALS PARTS OF SERVICES STORE AND EQUIPMENT AGAINST CORROSION PART 1:TEMPORARY PROTECTION |
865 |
3439-10: 2011 (Revision No. 2)
|
FILLER WIRE 30% Cr & 10% Ni |
866 |
0457-01 (Part 4): 2010(Revision No. 3)
|
TREATMENT FOR PROTECTION OF METAL PARTS OF SERVICE STORES AND EQUIPMENT AGAINST CORROSION PART 4: PAINTS, LACQUERS AND VARNISH FINISHES |
867 |
0453-01:2007 Revision No. 1
|
METALLIC SPRINGS: PROTECTION AGAINST CORROSION |
868 |
0460-01:2007 Revision No. 1
|
PREVENTION OF CORROSION OF CADMIUM AND ZINC PLATING BY VAPOURS FROM ORGANIC MATERIALS |
869 |
0474-01 : 2013 (Revision No. 2)
|
IDENTIFICATION OF MATERIAL FOR RIFLE 5.56 mm 1B (DS CAT. No. 1005 - 007 741) |
870 |
3439-11:2010 (Revision No. 2)
|
COATED METALLIC ELECTRODE OF 30% Cr & 10% Ni |
871 |
50102 : 2005 Revision No. 5
|
List of Approved Electronic Components (DS Class 5999) |
872 |
5820-16: 1994 Reaffirmed 2005
|
GENERAL REQUIREMENTS OF RECEIVER SURVEILLANCE (PANORAMIC) |
873 |
5820-15: 1994 Reaffirmed 2005
|
GENERAL REQUIREMENTS OF RECEVERS,SERVEILLANCE |
874 |
0767: 2002 Reaffirmed 2008
|
MEASUREMENT OF RADIO FREQUENCY SPECTRUM CHARACTERISTICS |
875 |
0766 : 2002 Reaffirmed 2013
|
mm WAVE ORTHO - MODE TRANSDUCER |
876 |
0765 : 2002
|
mm Wave Balanced Mixer |
877 |
0764 : 2002 Reaffirmed 2013
|
mm WAVE BAND PASS FILTER |
878 |
0763 : 2002
|
mm WAVE GUIDE |
879 |
0762 : 2002 Reaffirmed 2007
|
DEFENCE COMMUNICATION STRATEGY USING PCM BUILDING BLOCKS |
880 |
0761 : 2001 Reaffirmed 2007
|
FORMULATION OF QUALITY ASSURANCE PROCEDURE: COTS ITEMS (AVIONICS) |
881 |
0755 : 2001 Reaffirmed 2007
|
UNIFORM IMPLEMENTATION OF COTS PERTAINING TO ELECTRONIC COMPONENTS IN THE SERVICESx |
882 |
0752 : 2001 Reaffirmed 2007
|
SYSTEM LEVEL ELECTROMAGNETIC ENVIRONMENTAL EFFECTS CONTROL |
883 |
0751 : 2001 Reaffirmed 2007
|
USE OF COMMERCIAL OFF THE SHELF (COTS) ELECTRONICS COMPONENTS IN DEFENCE SUPPLIES |
884 |
0298 : 2002 Reaffirmed 2008
|
WAVE HYBRIDS |
885 |
0299 : 2002 Reaffirmed 2008
|
COVER AND CHOKE TYPE FLANGES FOR WAVE GUIDE |
886 |
0297 : 2002 Reaffirmed 2008
|
mm WAVE DIRECTIONAL COUPLER |
887 |
0296 : 2000 Reaffirmed 2013
|
mm - WAVE SPST SWITCHES |
888 |
0295 : 1999Reaffirmed 2011
|
mm-WAVE TERMINATIONS |
889 |
0294 : 1999 Reaffirmed 2011
|
mm- WAVE ISOLATORS |
890 |
0293 : 1999 Reaffirmed 2011
|
mm WAVE CIRCULATORS |
891 |
0292 : 1998 Reaffirmed 2008
|
WAVE IMPATT OSCILLATORS |
892 |
0291 : 1998 Reaffirmed 2009
|
WAVE GUNN OSCILLATORS |
893 |
0290 : 1997 Reaffirmed 2009
|
ANTENNAS INCLUDING DETAILS OF ANTENNAS IN USE |
894 |
0289 : 1995 Reaffirmed 2011
|
RADAR SIGNAL PROCESSING AND DATA REMOTING SYSTEM: EMC CONSIDERATIONS |
895 |
0288 : 2011 (Revision No.1) Supersedes JSG 0288:1995
|
ELECTROMAGNETIC COMPATIBILITY FOR RADAR SYSTEMS |
896 |
0287 : 1995 Reaffirmed 2007
|
REQUIREMENTS OF CALIBRATION IN THE FIELD OF OPTO-ELECTRONICS (INFRARED, PASSIVE, THERMAL IMAGER & LASERS) |
897 |
0286: 1994 Reaffirmed 2007
|
DESIGN FOR RELIABILITY, MATINTATINABILITY AND TESTABILITY OF ELECTRONIC EQUIPMENT |
898 |
0285: 1992 Reaffirmed 2009
|
Safety Requirement & Standards for Service Electronic Equipment |
899 |
0284 : 1992 Reaffirmed 2009
|
Procedure for Calibration of Microwave Parameters |
900 |
0283: 1995 Reaffirmed 2007
|
DESIGN FOR MANUFACTURING REQUIREMENTS FOR SERVICE ELECTRONIC EQUIPMENTS/SYSTEMS |